Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001D0CP
Model Year Start: 2019 Model: GR Corolla Prod Date Range: [06/2018 - 01/2019]
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]

INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Connect the 2 airbag connectors and vent hole connector of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.

*a

Airbag Connector

*b

Airbag Connector Locking Button

*c

Vent Hole Connector

*d

Vent Hole Connector Locking Button

Push in this Direction

NOTICE:

  • When connecting any airbag connector, take care not to damage the airbag wire harness.
  • Be sure to only connect the connectors to each corresponding color.

(b) Push in the 2 airbag connector locking buttons and vent hole connector locking button to install the 2 airbag connectors and vent hole connector to the instrument panel passenger airbag assembly.

(c) Engage the clamp.

2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

(a) Engage the 3 hooks.

(b) Push in the instrument panel passenger airbag assembly to engage the 3 hooks.

(c) Install the instrument panel passenger airbag assembly with the 2 screws.

3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+

4. CONNECT NO. 2 INSTRUMENT PANEL WIRE

(a) Check that the engine switch is off.

(b) Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Before connecting the connector, check that the position of the white housing lock is as shown in the illustration.

*a

Correct

*b

Incorrect

(d) Connect the No. 2 instrument panel wire.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.

HINT:

  • Be sure to connect the connector until it is locked (when locking, make sure that a click sound can be heard).
  • When the connector is locked, the white housing lock will slide. Do not hold the white housing lock as it may result in an insecure connection.

5. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+