Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D0BO |
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 - 01/2019] |
Title: STEERING COLUMN: STEERING WHEEL (except G16E-GTS): INSTALLATION; 2019 MY Corolla Corolla Hatchback Corolla HV [06/2018 - 01/2019] |
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
-
Do not remove/install the spiral cable with sensor sub-assembly with the battery connected and the engine switch on (IG).
-
Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed, with the battery connected and the engine switch on (IG).
-
Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.
PROCEDURE
1. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)
Click here
2. INSTALL STEERING PAD SWITCH ASSEMBLY
Click here
3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
4. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
Click here
5. INSTALL STEERING WHEEL ASSEMBLY
(a) Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.
|
|
(b) Using a 10 mm hexagon socket wrench, install the steering wheel assembly set bolt.
Torque:
62 N·m {632 kgf·cm, 46 ft·lbf}
(c) Connect each connector.
6. CHECK STEERING WHEEL CENTER POINT
7. INSTALL HORN BUTTON ASSEMBLY
Click here
|