STEERING COLUMN: STEERING WHEEL (except G16E-GTS): INSTALLATION; 2019 MY Corolla Corolla Hatchback Corolla HV [06/2018

Last Modified: 07-31-2024	6.11:8.1.0	Doc ID: RM100000001D0BO
Model Year Start: 2019	Model: Corolla Hatchback	Prod Date Range: [06/2018 - 01/2019]
Title: STEERING COLUMN: STEERING WHEEL (except G16E-GTS): INSTALLATION; 2019 MY Corolla Corolla Hatchback Corolla HV [06/2018 - 01/2019]

INSTALLATION

NOTICE:

Do not remove/install the spiral cable with sensor sub-assembly with the battery connected and the engine switch on (IG).
Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed, with the battery connected and the engine switch on (IG).
Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

1. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)

Click here

2. INSTALL STEERING PAD SWITCH ASSEMBLY

Click here

3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

4. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

Click here

5. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.

Matchmark

(b) Using a 10 mm hexagon socket wrench, install the steering wheel assembly set bolt.

Torque:

62 N·m {632 kgf·cm, 46 ft·lbf}

6. CHECK STEERING WHEEL CENTER POINT

7. INSTALL HORN BUTTON ASSEMBLY

Click here