Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D0B0 |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 09/2019] |
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Data Signal Circuit between Radio Receiver and Stereo Jack Adapter; 2019 - 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2019] |
Data Signal Circuit between Radio Receiver and Stereo Jack Adapter
|
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.
WIRING DIAGRAM
PROCEDURE
1.
|
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
|
(a) Disconnect the I115 radio and display receiver assembly connector.
(b) Disconnect the I114 No. 1 stereo jack adapter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
I115-2 (US1-) - I114-9 (UDO-)
|
Always
|
Below 1 Ω
|
I115-3 (US1+) - I114-10 (UDO+)
|
Always
|
Below 1 Ω
|
I115-5 (USG1) - I114-12 (UJSS)
|
Always
|
Below 1 Ω
|
I115-2 (US1-) or I114-9 (UDO-) - Body ground
|
Always
|
10 kΩ or higher
|
I115-3 (US1+) or I114-10 (UDO+) - Body ground
|
Always
|
10 kΩ or higher
|
I115-5 (USG1) or I114-12 (UJSS) - Body ground
|
Always
|
10 kΩ or higher
|
|
|
*a
|
Front view of wire harness connector
(to Radio and Display Receiver Assembly)
|
*b
|
Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)
|
|
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|