Actuation Area-linked
|
With the engine switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off.
|
-
Map Light Assembly
-
Rear Room Light (No. 1 Room Light Assembly)
|
Door Lock/Unlock-linked
|
With the engine switch off and all of the doors closed and locked, unlock any door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off.
|
-
Map Light Assembly
-
Rear Room Light (No. 1 Room Light Assembly)
|
Door Open/Close-linked
|
With the engine switch off and all of the doors closed, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds.
|
-
Map Light Assembly
-
Rear Room Light (No. 1 Room Light Assembly)
|
With the engine switch off and all of the doors closed, open any front door and check that the light that operates turns on. While the light that operates is on, close the front doors and check that the light that operates turns off after approximately 40 seconds.
|
Engine Switch Illumination
|
With the engine switch in on (IG), open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off.
|
-
Map Light Assembly
-
Rear Room Light (No. 1 Room Light Assembly)
|
Engine Switch-linked
|
Turn the engine switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off.
|
-
Map Light Assembly
-
Rear Room Light (No. 1 Room Light Assembly)
|
Turn the engine switch from on (ACC) or on (IG) to off and check that the light that operates turns on for approximately 40 seconds and then turns off.
|
Engine Switch Illumination
|