Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001CZTI
Model Year Start: 2019 Model: Corolla Hatchback Prod Date Range: [06/2018 - 09/2019]
Title: M20A-FKS (COOLING): COOLING FAN MOTOR (w/o Cooling Fan ECU): REMOVAL; 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during cooling fan motor removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Headlight ECU sub-assembly LH
  • Synchronize the vehicle information
  • Perform headlight ECU sub-assembly LH initialization

Lighting system (w/ AFS)(EXT)

2019 - 2021 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 06/2021]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with AFS): INITIALIZATION

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback [06/2018 - 01/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2020 MY Corolla Corolla Hatchback [01/2019 - 03/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

2. DRAIN ENGINE COOLANT

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; MAINTENANCE: M20A-FKS COOLANT: REPLACEMENT+

3. REMOVE HEADLIGHT ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

4. REMOVE INLET NO. 3 AIR CLEANER

(a) Remove the 2 clips.

(b) Disengage the claw to remove the inlet No. 3 air cleaner.

5. REMOVE INLET NO. 1 AIR CLEANER

(a) Remove the 4 bolts and inlet No. 1 air cleaner from the upper radiator support sub-assembly and inlet No. 2 air cleaner.

6. REMOVE INLET NO. 2 AIR CLEANER

(a) Remove the inlet No. 2 air cleaner from the air cleaner case sub-assembly.

7. REMOVE HOOD LOCK ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL+ 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL+

8. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

(a) Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

(b) Disconnect the horn connector.

(c) Disengage the 3 clamps to disconnect the wire harness from the upper radiator support sub-assembly.

(d) Remove the 5 bolts and upper radiator support sub-assembly.

9. DISCONNECT NO. 2 WATER BY-PASS HOSE

(a) Disengage the 5 clamps to disconnect the No. 2 water by-pass hose from the radiator assembly and fan shroud.

10. DISCONNECT NO. 1 RADIATOR HOSE

(a) Disengage the clamp and disconnect the No. 1 radiator hose from the hose clamp.

11. DISCONNECT NO. 2 RADIATOR HOSE

(a) Disengage the clamp and disconnect the No. 2 radiator hose from the hose clamp.

12. REMOVE NO. 2 RADIATOR AIR GUIDE

(a) Disengage the 5 claws to remove the No. 2 radiator air guide.

13. REMOVE FAN WITH MOTOR ASSEMBLY

(a) Disconnect the cooling fan motor connector.

(1) Disengage the claw and raise the lock lever to disconnect the cooling fan motor connector as shown in the illustration.

NOTICE:

After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.

*a

Lock Lever

(b) Disengage the 2 wire harness clamps.

(c) Disengage the 2 claws.

(d) Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan with motor assembly.

14. REMOVE FAN

(a) Remove the 3 screws and fan from the cooling fan motor.

15. REMOVE COOLING FAN MOTOR

(a) Remove the 3 screws and cooling fan motor from the fan shroud.