M20A-FKS (COOLING): FLOW SHUTTING VALVE (for CVT): INSTALLATION; 2019 - 2020 MY Corolla Corolla Hatchback [06/2018

Last Modified: 07-31-2024	6.11:8.1.0	Doc ID: RM100000001CZTF
Model Year Start: 2019	Model: Corolla Hatchback	Prod Date Range: [06/2018 - 09/2019]
Title: M20A-FKS (COOLING): FLOW SHUTTING VALVE (for CVT): INSTALLATION; 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]

INSTALLATION

1. INSTALL FLOW SHUTTING VALVE (WATER VALVE)

(a) Connect the No. 4 water by-pass hose to the flow shutting valve (water valve) and slide the clip to secure it.

*a	2 to 5 mm (0.0787 to 0.197 in.)	*b	Paint Mark
*c	45° (Tabs of Clip Installation Area)	*d	protrusion

NOTICE:

Make sure to align the paint mark of the No. 4 water by-pass hose with the protrusion of the flow shutting valve (water valve).
Make sure to slide the No. 4 water by-pass hose until it contacts the hose stopper of the flow shutting valve (water valve).
Make sure that the tabs of the clip are within the area shown in the illustration.

(b) Connect the No. 3 water by-pass hose to the flow shutting valve (water valve) and slide the clip to secure it.

*a	2.0 to 7.0 mm (0.0787 to 0.276 in.)	*b	Paint Mark
*c	60° (Tabs of Clip Installation Area)	*d	protrusion

NOTICE:

Make sure to align the paint mark of the No. 3 water by-pass hose with the protrusion of the flow shutting valve (water valve).
Make sure to slide the No. 3 water by-pass hose until it contacts the hose stopper of the flow shutting valve (water valve).
Make sure that the tabs of the clip are within the area shown in the illustration.

Torque:

19 N·m {194 kgf·cm, 14 ft·lbf}

(d) Connect the flow shutting valve (water valve) connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click here

3. ADD ENGINE COOLANT

Click here

4. INSPECT FOR COOLANT LEAK

Click here

5. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here