EG60 (MANUAL TRANSMISSION / TRANSAXLE): SHIFT LEVER ASSEMBLY: INSTALLATION; 2019 - 2020 MY Corolla Corolla Hatchback [06/2018

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM100000001CZO1
Model Year Start: 2019	Model: Corolla Hatchback	Prod Date Range: [06/2018 - 03/2019]
Title: EG60 (MANUAL TRANSMISSION / TRANSAXLE): SHIFT LEVER ASSEMBLY: INSTALLATION; 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 03/2019]

INSTALLATION

1. INSTALL FLOOR SHIFT LEVER ASSEMBLY

(a) Install the floor shift lever assembly with the 4 bolts in the sequence shown in the illustration.

Torque:

12 N·m {122 kgf·cm, 9 ft·lbf}

(b) Engage the 4 clamps to install the wire harness to the floor shift lever assembly.

2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Turn the lock nut of the transmission control select cable counterclockwise. While holding the lock nut, push in the stopper.

(b) Connect the transmission control select cable to the floor shift lever assembly.

NOTICE:

After installation, check that the outer part of the stopper is as shown in the illustration.
Do not forcibly pull the transmission control cable assembly into the cabin.

Stopper

(c) Connect the transmission control shift cable to the floor shift lever assembly in the same manner as the transmission control select cable.

(d) Connect the transmission control shift cable to the floor shift lever assembly.

(e) Connect the transmission control select cable to the floor shift lever assembly with the clip.

3. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

Click here

4. INSTALL CONSOLE BOX ASSEMBLY

Click here