Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001CZK9
Model Year Start: 2019 Model: Corolla Hatchback Prod Date Range: [06/2018 - 11/2022]
Title: EG60 (MANUAL TRANSMISSION / TRANSAXLE): SPEED SENSOR: INSTALLATION; 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]

INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR

(a) Clean the bolt and installation hole in the manual transmission case.

(b) Coat a new O-ring with gear oil and install it to the transmission revolution sensor.

(c) Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

NOTICE:

Make sure to install the bolt immediately after applying adhesive to prevent foreign matter from attaching to it.

*a

Adhesive

(d) Install the transmission revolution sensor to the manual transmission case with the bolt.

Torque:

7.8 N·m {80 kgf·cm, 69 in·lbf}

(e) Connect the transmission revolution sensor connector.

2. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback [06/2018 - 01/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2020 MY Corolla Corolla Hatchback [01/2019 - 03/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2020 - 2021 MY Corolla Corolla Hatchback [09/2019 - 06/2021]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2022 MY Corolla Corolla Hatchback [06/2021 - 09/2022]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 MY Corolla Corolla Hatchback [09/2022 - 11/2022]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+