SEAT: FRONT SEAT CUSHION HEATER (for Power Seat): REMOVAL; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018

Last Modified: 07-31-2024	6.11:8.1.0	Doc ID: RM100000001CYQV
Model Year Start: 2019	Model: GR Corolla	Prod Date Range: [06/2018 - 01/2019]
Title: SEAT: FRONT SEAT CUSHION HEATER (for Power Seat): REMOVAL; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front seat cushion heater assembly LH removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed
Disconnect cable from negative battery terminal	Perform steering sensor zero point calibration	Lane Control System
		Pre-collision System
		Lighting System (w/ AFS)(EXT)
	Initialize back door lock	Power Door Lock Control System

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

NOTICE:

If the front seat airbag assembly LH has been deployed, replace the front seat airbag assembly LH, front seatback frame sub-assembly LH, separate type front seatback pad and separate type front seatback cover with the necessary parts in accordance with the extent of the collision damage.
After the engine switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal. (for Audio and Visual System)
After the engine switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal. (for Navigation System)

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

2. REMOVE FRONT SEAT ASSEMBLY LH

Click here

3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

Click here

4. REMOVE FRONT SEAT FRONT CUSHION SHIELD LH

Click here

5. REMOVE FRONT SEAT CUSHION SHIELD LH

Click here

6. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

Click here

7. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Click here

8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

Click here

9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

Click here

10. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH

(a) for Sporty Seat Type:

(1) Remove the 12 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover. (for Cushion Heater Type A)

(2) Remove the 19 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover. (for Cushion Heater Type B)

(3) Remove the 25 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover. (for Cushion Heater Type C)

(b) for Sports Seat Type:

(1) Remove the 14 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover. (for Cushion Heater Type A)

(2) Remove the 18 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover. (for Cushion Heater Type B)