| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001CYHO |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 01/2019] |
| Title: WIPER / WASHER: WIPER SWITCH: INSPECTION; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] | ||
INSPECTION
PROCEDURE
1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
|
*A |
for Type A |
*B |
for Type B |
|
*a |
Component without harness connected (Windshield Wiper Switch Assembly) |
- |
- |
Standard Resistance:
Front Wiper Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
14 (MIST) - 5 (E) |
MIST position |
Below 1 Ω |
|
Except MIST position |
10 kΩ or higher |
|
|
10 (W_OFF) - 5 (E) |
OFF position |
Below 1 Ω |
|
Except OFF position |
10 kΩ or higher |
|
|
13 (+S) - 5 (E) |
INT position |
Below 1 Ω |
|
Except INT position |
10 kΩ or higher |
|
|
11 (+1) - 5 (E) |
LO position |
Below 1 Ω |
|
Except LO position |
10 kΩ or higher |
|
|
12 (+2) - 5 (E) |
HI position |
Below 1 Ω |
|
Except HI position |
10 kΩ or higher |
Front Washer Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
15 (WF) - 5 (E) |
ON position |
Below 1 Ω |
|
OFF position |
10 kΩ or higher |
Rear Wiper Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
7 (C1R) - 5 (E) |
OFF position |
10 kΩ or higher |
|
6 (+1R) - 5 (E) |
||
|
7 (C1R) - 5 (E) |
INT position |
Below 1 Ω |
|
6 (+1R) - 5 (E) |
ON position |
Rear Washer Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
9 (WR) - 5 (E) |
ON position |
Below 1 Ω |
|
OFF position |
10 kΩ or higher |
Intermittent Time Adjustment Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
4 (VR) - 5 (E) |
P1 position |
1102 to 1218 Ω |
|
P2 position |
570 to 630 Ω |
|
|
P3 position |
256.5 to 283.5 Ω |
|
|
P4 position |
Below 1 Ω |
If the result is not as specified, replace the windshield wiper switch assembly.
|
|