Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CY60 |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 09/2022] |
Title: THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): New Key Registration Warning Message is not Displayed; 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022] |
New Key Registration Warning Message is not Displayed
|
DESCRIPTION
If the new key registration warning message is not displayed after an electrical key transmitter sub-assembly has been registered, there may be communication problem between the certification ECU (smart key ECU assembly) and combination meter assembly (meter ECU).
CAUTION / NOTICE / HINT
PROCEDURE
1.
|
READ VALUE USING TECHSTREAM (FL DOOR COURTESY SW)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
FL Door Courtesy SW
|
Front door LH courtesy light switch signal
|
OFF or ON
|
OFF: Front door LH closed
ON: Front door LH open
|
-
|
Body Electrical > Main Body > Data List
Tester Display
|
FL Door Courtesy SW
|
Result
|
Proceed to
|
On the Techstream screen, ON or OFF is displayed accordingly.
|
A
|
On the Techstream screen, ON or OFF is not displayed accordingly.
|
B
|
A
|
|
|
2.
|
CHECK METER / GAUGE SYSTEM
|
(a) With the electrical key transmitter sub-assembly in the vehicle and all of the doors closed, lock the doors using the entry lock function and check that the warning message is displayed on the multi-information display.
Result
|
Proceed to
|
The warning message is displayed on the multi-information display.
|
A
|
The warning message is not displayed on the multi-information display.
|
B
|
A
|
|
|
3.
|
ADDITIONAL KEY REGISTRATION
|
(a) Clear all of the registered electrical key transmitter sub-assemblies except one and perform registration again.
Click here
NEXT
|
|
|
4.
|
CHECK MULTI-INFORMATION DISPLAY
|
(a) With all of the doors closed, lock the doors using the entry lock function.
(b) Unlock the doors using the entry unlock function, open the driver door and check that the warning message is displayed on the multi-information display.
Result
|
Proceed to
|
The warning message is displayed on the multi-information display.
|
A
|
The warning message is not displayed on the multi-information display.
|
B
|
A |
|
END (10 DAYS MAY HAVE ELAPSED SINCE AN ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY WAS REGISTERED)
|
|