Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CY5R |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 09/2022] |
Title: THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): B2277; Detecting Vehicle Submersion; 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022] |
DTC
|
B2277
|
Detecting Vehicle Submersion
|
DESCRIPTION
This DTC is stored when a malfunction in the water submersion detection circuit inside the certification ECU (smart key ECU assembly) is detected.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Note
|
B2277
|
Detecting Vehicle Submersion
|
Water submersion detected by the water submersion detection circuit inside the certification ECU (smart key ECU assembly). (1-trip detection logic*)
|
Certification ECU (smart key ECU assembly)
|
DTC Output Confirmation Operation:
-
Wait 300 seconds after connecting the cable to the negative (-) battery terminal.
|
-
*: Only detected while a malfunction is present.
Vehicle Condition and Fail-safe Function when Malfunction Detected
Vehicle Condition when Malfunction Detected
|
Fail-safe Function when Malfunction Detected
|
The engine switch cannot be turned off and the engine cannot be started.
|
-
|
Related Data List and Active Test Items
DTC No.
|
Data List and Active Test
|
B2277
|
-
|
CAUTION / NOTICE / HINT
HINT:
Before proceeding with troubleshooting, check if there are any signs of water damage to the certification ECU (smart key ECU assembly). If there are any signs of water damage, replace the certification ECU (smart key ECU assembly) and take measures against the cause of the water damage.
PROCEDURE
(a) Check that the certification ECU (smart key ECU assembly), its ground area and wire harnesses have no signs of water intrusion.
Result
|
Proceed to
|
No sign of water intrusion found
|
A
|
Signs of water intrusion found
|
B
|
B |
|
TAKE MEASURES AGAINST WATER INTRUSION AND REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
|
|