| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001CXNL |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 01/2019] |
| Title: LIGHTING (INT): PERSONAL LIGHT: INSPECTION; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] | ||
INSPECTION
PROCEDURE
1. INSPECT MAP LIGHT SUB-ASSEMBLY
|
*a |
Component without harness connected (Map Light Sub-assembly) |
(a) Resistance Check
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
2 (RLMP) - 1 (DOOR) |
Door linked switch on |
Below 1 Ω |
|
2 (RLMP) - 11 (GND) |
Dome light switch on |
Below 1 Ω |
If the result is not as specified, replace the map light sub-assembly.
(b) Illumination Inspection
(1) Apply battery voltage to the map light sub-assembly and check that the lights illuminate.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 11 (GND) |
Front map light switch LH on |
Front map light LH illuminates |
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 11 (GND) |
Front map light switch RH on |
Front map light RH illuminates |
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 11 (GND) |
Front map light switches off and dome light switch on |
Front map light LH and RH illuminate |
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 1 (DOOR) |
Front map light switches off and door linked switch on |
Front map light LH and RH illuminate |
If the result is not as specified, replace the bulb or map light sub-assembly.
|
|