Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CXML |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 09/2022] |
Title: LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL; 2019 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear height control sensor sub-assembly LH removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Rear height control sensor sub-assembly LH
|
Perform headlight ECU sub-assembly LH initialization
|
Lighting system (w/ AFS)(EXT)
|
|
PROCEDURE
1. REMOVE REAR WHEEL (for LH Side)
Click here
2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
NOTICE:
If the rear height control sensor sub-assembly LH has been struck or dropped, replace it with a new one.
(a) Disconnect the connector.
|
|
(b) Remove the 2 bolts.
(c) Disengage the 2 guides to remove the rear height control sensor sub-assembly LH.
|