Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001CXLM
Model Year Start: 2019 Model: GR Corolla Prod Date Range: [06/2018 -           ]
Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: INSPECTION; 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT REAR LIGHT LENS AND BODY LH

*a

Component without harness connected

(Rear Light Lens and Body LH)

(a) Illumination Inspection

(1) Install the rear light socket and wire LH.

(2) Install the rear light LED.

(3) Apply battery voltage to the rear light lens and body LH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal V8-1 (B)

Battery negative (-) → Terminal V8-3 (E)

Taillight light illuminates

Battery positive (+) → Terminal V8-2 (B)

Battery negative (-) → Terminal V8-3 (E)

Back-up light illuminates

If the result is not as specified, replace the rear light lens and body LH.

2. INSPECT REAR LIGHT LENS AND BODY RH

*a

Component without harness connected

(Rear Light Lens and Body RH)

(a) Illumination Inspection

(1) Install the rear light socket and wire RH.

(2) Install the rear light LED.

(3) Apply battery voltage to the rear light lens and body RH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal V5-1 (B)

Battery negative (-) → Terminal V5-3 (E)

Taillight light illuminates

Battery positive (+) → Terminal V5-2 (B)

Battery negative (-) → Terminal V5-3 (E)

Back-up light illuminates

If the result is not as specified, replace the rear light lens and body RH.

3. INSPECT REAR LIGHT LED

*a

Component without harness connected

(Rear Light LED)

(a) Illumination Inspection

(1) Apply battery voltage to the rear light LED and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 2 (B)

Battery negative (-) → Terminal 1 (E)

Back-up light illuminates

If the result is not as specified, replace the rear light LED.