Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001CXLI
Model Year Start: 2019 Model: GR Corolla Prod Date Range: [06/2018 - 09/2022]
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY (for Hatchback): INSPECTION; 2019 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2022]

INSPECTION

PROCEDURE

1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH

*a

Component without harness connected

(Rear Combination Light Lens and Body LH)

(a) Illumination Inspection

(1) Install the rear combination light code LH.

(2) Apply battery voltage to the rear combination light lens and body LH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (TL)

Battery negative (-) → Terminal 3 (E)

Taillight and side marker light illuminate

Battery positive (+) → Terminal 1 (STP)

Battery negative (-) → Terminal 3 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light lens and body LH.

2. INSPECT REAR COMBINATION LIGHT LENS AND BODY RH

*a

Component without harness connected

(Rear Combination Light Lens and Body RH)

(a) Illumination Inspection

(1) Install the rear combination light code RH.

(2) Apply battery voltage to the rear combination light lens and body RH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (TL)

Battery negative (-) → Terminal 3 (E)

Taillight and side marker light illuminate

Battery positive (+) → Terminal 1 (STP)

Battery negative (-) → Terminal 3 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light lens and body RH.

3. INSPECT REAR COMBINATION LIGHT LED

(a) Illumination Inspection

(1) Apply battery voltage to the rear combination light LED and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (B)

Battery negative (-) → Terminal 1 (E)

Turn signal light illuminates

If the result is not as specified, replace the rear combination light LED.

*a

Component without harness connected

(Rear Combination Light LED)

4. INSPECT REAR COMBINATION LIGHT LED LH

(a) Illumination Inspection

(1) Apply battery voltage to the rear combination light LED LH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 3 (STP)

Battery negative (-) → Terminal 1 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light LED LH.

*a

Component without harness connected

(Rear Combination Light LED LH)

5. INSPECT REAR COMBINATION LIGHT LED RH

(a) Illumination Inspection

(1) Apply battery voltage to the rear combination light LED RH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 3 (STP)

Battery negative (-) → Terminal 1 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light LED RH.

*a

Component without harness connected

(Rear Combination Light LED RH)