|
Last Modified: 06-05-2026 |
6.11:8.1.0 |
Doc ID: RM100000001CXL4 |
|
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 - 01/2019] |
|
Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSPECTION; 2019 MY Corolla Hatchback [06/2018 - 01/2019] |
INSPECTION
PROCEDURE
1. INSPECT HEADLIGHT UNIT ASSEMBLY LH (w/o AFS)
(a) Illumination Inspection
|
(1) Apply battery voltage to the headlight unit assembly LH and check that the light illuminates.
Turn Signal Light
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 3 (E)
|
Turn signal light illuminates
|
If the result is not as specified, replace the headlight unit assembly LH.
|
|
|
*a
|
Component without harness connected
(Headlight Unit Assembly LH)
|
|
|
|
(2) Apply battery voltage to the headlight unit assembly LH and check that the light illuminates.
Daytime running light
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 4 (E)
|
Daytime running light illuminates
|
Parking light
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 4 (E)
|
Parking light illuminates
|
Lo/Hi beam headlight
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 3 (LO)
Battery negative (-) → Terminal 4 (E)
|
Lo/Hi beam headlight illuminates
|
If the result is not as specified, replace the headlight unit assembly LH.
|
|
|
*a
|
Component without harness connected
(Headlight Unit Assembly LH)
|
|
|
(b) Operation Check
|
(1) Apply battery voltage to the headlight unit assembly LH and check that the Lo/Hi beam shade operates.
OK
|
Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 6 (SOL)
Battery negative (-) → Terminal 4 (E)
|
Operates normally
|
If the result is not as specified, replace the headlight unit assembly LH.
|
|
|
*a
|
Component without harness connected
(Headlight Unit Assembly LH)
|
|
|
2. INSPECT HEADLIGHT UNIT ASSEMBLY RH (w/o AFS)
(a) Illumination Inspection
|
(1) Apply battery voltage to the headlight unit assembly RH and check that the light illuminates.
Turn Signal Light
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 3 (E)
|
Turn signal light illuminates
|
If the result is not as specified, replace the headlight unit assembly RH.
|
|
|
|
*a
|
Component without harness connected
(Headlight Unit Assembly RH)
|
|
|
|
(2) Apply battery voltage to the headlight unit assembly RH and check that the light illuminates.
Daytime running light
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 4 (E)
|
Daytime running light illuminates
|
Parking light
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 4 (E)
|
Parking light illuminates
|
Lo/Hi beam headlight
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 3 (LO)
Battery negative (-) → Terminal 4 (E)
|
Lo/Hi beam headlight illuminates
|
If the result is not as specified, replace the headlight unit assembly RH.
|
|
|
|
*a
|
Component without harness connected
(Headlight Unit Assembly RH)
|
|
|
(b) Operation Check
|
(1) Apply battery voltage to the headlight unit assembly RH and check that the Lo/Hi beam shade operates.
OK
|
Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 6 (SOL)
Battery negative (-) → Terminal 4 (E)
|
Operates normally
|
If the result is not as specified, replace the headlight unit assembly RH.
|
|
|
|
*a
|
Component without harness connected
(Headlight Unit Assembly RH)
|
|
|
|
