Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CVTS |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 09/2019] |
Title: REAR SUSPENSION: REAR STABILIZER BAR (for Hatchback): INSTALLATION; 2019 - 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2019] |
INSTALLATION
PROCEDURE
1. INSTALL REAR STABILIZER BUSHING
(a) Install the 2 rear stabilizer bushings to the rear stabilizer bar.
NOTICE:
Be sure to install the rear stabilizer bushings so that each cutout faces the front of the vehicle.
2. INSTALL REAR NO. 1 STABILIZER BAR BRACKET
(a) Install the 2 rear No. 1 stabilizer bar brackets to the 2 rear stabilizer bushings.
NOTICE:
Be sure to install the rear No. 1 stabilizer bar brackets so that each arrow mark faces the front of the vehicle.
*a
|
Arrow Mark
|
|
Front of the Vehicle
|
3. INSTALL REAR STABILIZER BAR
(a) Install the rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings to the rear suspension member sub-assembly with the 4 bolts.
Torque:
78 N·m {795 kgf·cm, 58 ft·lbf}
NOTICE:
-
Ensure that the identification mark faces the right side of the vehicle.
-
Temporarily tighten the 3 bolts in the order of A, B and D, and then fully tighten the 4 bolts in the order of C, D, A, and B.
|
|
4. STABILIZE SUSPENSION
Click here
5. INSTALL REAR STABILIZER LINK ASSEMBLY LH
(a) Install the rear stabilizer link assembly LH with the nut (A).
Torque:
75 N·m {765 kgf·cm, 55 ft·lbf}
HINT:
If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
|
|
(b) Install the rear stabilizer link assembly LH with the bolt and nut (B).
Torque:
75 N·m {765 kgf·cm, 55 ft·lbf}
(c) Install the cap to the rear stabilizer link assembly LH.
6. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT:
Perform the same procedure as for the LH side.
7. INSTALL REAR FLOOR SIDE MEMBER COVER LH (w/ Cover)
(a) Install the rear floor side member cover LH with the clip (B).
|
|
(b) Install the 3 bolts and clip (A).
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
8. INSTALL REAR FLOOR SIDE MEMBER COVER RH (w/ Cover)
(a) Install the rear floor side member cover RH with the clip.
|
|
(b) Install the 3 bolts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
9. INSTALL REAR WHEEL
Click here
|