| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001CVOB |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 01/2019] |
| Title: HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 2 AIR DUCT
(a) Remove the screw.
|
*a |
View A |
|
Front |
(b) Disengage the 3 claws to remove the No. 2 air duct.
NOTICE:
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 2 air duct.
2. REMOVE BLOWER ASSEMBLY
Click here
![2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; HEATING / AIR CONDITIONING: BLOWER UNIT: REMOVAL+](/t3Portal/stylegraphics/info.gif)
3. REMOVE ASPIRATOR
|
(a) Disengage the guide and 2 claws to remove the aspirator. |
|
4. REMOVE REAR NO. 1 AIR DUCT
(a) Disengage the 3 claws and remove the rear No. 1 air duct as shown in the illustration.
|
Remove in this Direction |
5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the connector.
|
|
Remove in this Direction |
(b) Remove the screw.
(c) Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY
|
(a) Disconnect each connector. |
|
(b) Disengage each clamp to remove the air conditioning harness assembly.
7. REMOVE HEATER COVER
(a) Remove the screw and heater cover as shown in the illustration.
|
|
Remove in this Direction |
8. REMOVE DRAIN COOLER HOSE
|
(a) Remove the drain cooler hose. |
|
9. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) for Single Type:
|
(1) Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly. |
|
(b) for Dual Type:
|
(1) Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly. |
|
10. REMOVE HEATER GROMMET
|
(a) Remove the heater grommet. |
|
11. REMOVE HEATER CLAMP
|
(a) Disengage the 3 claws to remove the heater clamp. |
|
12. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
|
|
Remove in this Direction |
(a) Remove the heater radiator unit sub-assembly as shown in the illustration.
NOTICE:
Prepare a drain pan or cloth in case the coolant leaks.
13. REMOVE COOLING UNIT PARTS
|
(a) Remove the cooling unit parts. |
|
14. REMOVE COOLER EXPANSION VALVE
|
(a) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve. |
|
(b) Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
15. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Disengage the 10 claws to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.
|
(c) Disengage the clamp. |
|
(d) Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
16. REMOVE NO. 1 COOLER THERMISTOR
Click here
|
|