AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Gasoline Model with Dual Knob Type): B15F7; Certification ECU Vehicle Information Reading/Writing Process Malfunction; 2019 - 2023 MY Corolla Corolla Hatchback GR Corolla [06/2018

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM100000001CVEP
Model Year Start: 2019	Model: GR Corolla	Prod Date Range: [06/2018 - 11/2022]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Gasoline Model with Dual Knob Type): B15F7; Certification ECU Vehicle Information Reading/Writing Process Malfunction; 2019 - 2023 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 11/2022]

DTC

B15F7

Certification ECU Vehicle Information Reading/Writing Process Malfunction

DESCRIPTION

This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the audio and visual system vehicle customization screen.

HINT:

The certification ECU (smart key ECU assembly) controls the smart key system related items that are customizable via the audio and visual system vehicle customization screen.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B15F7	Certification ECU Vehicle Information Reading/Writing Process Malfunction	Certification ECU (smart key ECU assembly) vehicle setting processing malfunction	CAN communication system Smart key system Certification ECU (smart key ECU assembly) Radio and display receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
Before replacing the certification ECU (smart key ECU assembly), refer to Registration.
Click here

PROCEDURE

1.	CHECK CAN COMMUNICATION SYSTEM

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

OK:

CAN communication DTCs are not output.

GO TO CAN COMMUNICATION SYSTEM

2.	CHECK SMART KEY SYSTEM

(a) Check if the smart key system is malfunctioning.

for Entry Function: Click here

for Start Function: Click here

HINT:

Customization may not be possible depending on the malfunction in the smart key system.

OK:

No malfunctions are present in the smart key system.

GO TO SMART KEY SYSTEM

for Entry Function: Click here

for Start Function: Click here

3.	CHECK CUSTOMIZE ITEMS

(a) Make a note of the customizable items for the certification ECU related system.

HINT:

The items shown as customizable via the audio and visual system vehicle customization screen can also be changed using the Techstream. In the following step, the Techstream will be used.

(1) To match-up the items on the audio and visual system vehicle customization screen with the items on the Techstream, check the customize parameters list for the smart key system related items that can be customized via the audio and visual system vehicle customization screen.

for Entry Function: Click here

for Start Function: Click here

(b) Using the Techstream, check that it is possible to change the settings of the customize parameters that are available for customization via the audio and visual system vehicle customization screen.

OK:

The items available for customization via the audio and visual system vehicle customization screen can be customized successfully using the Techstream.

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)