| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001CUSW |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 01/2019] |
| Title: PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): VEHICLE CONTROL HISTORY; 2019 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 01/2019] | ||
VEHICLE CONTROL HISTORY
NOTICE:
- Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.
- Repairing or replacing related parts may cause vehicle control history (RoB) codes to be stored.
CHECK VEHICLE CONTROL HISTORY (PRE-COLLISION SYSTEM)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Pre-Collision System / Utility / Vehicle Control History (RoB)
Body Electrical > Pre-Collision System > Utility
|
Tester Display |
|---|
|
Vehicle Control History (RoB) |
(e) According to the display on the Techstream, read the Vehicle Control History (RoB).
Vehicle Control History (RoB)
|
Multi-information Display |
Code |
Tester Display |
Description |
Diagnostic Note |
|---|---|---|---|---|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2000 |
Yaw Rate Sensor Malfunction |
The forward recognition camera received a yaw rate sensor malfunction signal from the skid control ECU (brake actuator assembly). |
Perform troubleshooting for the electronically controlled brake system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2001 |
Steering Angle Sensor Malfunction |
The forward recognition camera received a steering sensor malfunction signal from the steering sensor. |
Perform troubleshooting for the electronically controlled brake system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2002 |
Accelerator Sensor Malfunction |
The forward recognition camera received an accelerator pedal position sensor malfunction signal from the ECM. |
Perform troubleshooting for the SFI system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2003 |
Brake Control System Malfunction |
The forward recognition camera received an electronically controlled brake system malfunction signal from the skid control ECU (brake actuator assembly). |
Perform troubleshooting for the electronically controlled brake system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2011 |
Front Recognition Camera System Software Not Programmed |
The forward recognition camera cannot store the vehicle information. |
Perform troubleshooting for the front camera system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2012 |
Front Recognition Camera Malfunction |
The forward recognition camera detected an internal malfunction. |
Perform troubleshooting for the front camera system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2013 |
Front Recognition Camera Optical Axis Misalignment Malfunction |
The forward recognition camera detected optical axis misalignment. |
Refer to DTC C1AA800 in Front Camera System
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2014 |
Front Recognition Camera Optical Axis Not Adjusted |
Forward recognition camera optical axis adjustment has not been performed. |
If this Vehicle Control History code is output, perform forward recognition camera optical axis adjustment, clear the Vehicle Control History and then check that this code is not stored again. HINT: Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition. One Time Recognition: Click here
Sequential Recognition: Click here
|
|
Front Camera Unavailable See Owner's Manual |
X2015 |
Front Recognition Camera Dirt |
System operation was temporarily suspended due to the forward recognition camera not being able to detect objects. |
Refer to Vehicle Control History code X2015 of Front Camera System.
|
|
Front Camera Unavailable |
X2016 |
Front Recognition Camera Outside Guaranteed Operating Temperature |
System operation was temporarily suspended due to the forward recognition camera being excessively hot or cold. |
Refer to Vehicle Control History code X2016 of Front Camera System.
|
|
Front Camera Unavailable |
X2017 |
Front Recognition Camera Outside Guaranteed Operating Voltage |
System operation was temporarily suspended due to the forward recognition camera power source voltage being excessively high or low. |
Refer to Vehicle Control History code X2017 of Front Camera System.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2018 |
Front Recognition Camera Heater Malfunction |
The forward recognition camera detected a forward recognition camera heater malfunction. |
Perform troubleshooting for the front camera system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X201D |
Front Recognition Camera System Software Malfunction |
The forward recognition camera detected a specification information malfunction. |
Perform troubleshooting for the front camera system.
|
|
Front Camera Unavailable |
X201F |
Front Recognition Camera Temporary Unavailable (Front Recognition Camera Recognition Stop) |
The forward recognition camera operation was suspended. |
Perform troubleshooting for the front camera system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2020 |
Front Radar Sensor Destination Malfunction |
The forward recognition camera received a destination information malfunction signal from the millimeter wave radar sensor assembly. |
Perform troubleshooting for the front radar sensor system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2021 |
Front Radar Sensor Malfunction |
The forward recognition camera received a malfunction signal from the millimeter wave radar sensor assembly. |
Perform troubleshooting for the front radar sensor system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2022 |
Front Radar Sensor Optical Axis Misalignment Malfunction |
The forward recognition camera received a beam axis misalignment malfunction signal from the millimeter wave radar sensor assembly. |
Refer to DTC C1A1100 in front radar sensor system
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2023 |
Front Radar Sensor Optical Axis Not Adjusted |
The forward recognition camera received a beam axis unadjusted signal from the millimeter wave radar sensor assembly. |
If this code is output, perform millimeter wave radar sensor assembly beam axis adjustment, clear the Vehicle Control History and then check that this code is not output again.
|
|
Pre-Collision System Unavailable |
X2024 |
Front Radar Sensor Temporary Unavailable (Vertical Direction Optical Axis Misalignment) |
The forward recognition camera received a beam axis vertical misalignment signal from the millimeter wave radar sensor assembly. |
Perform millimeter wave radar sensor assembly beam axis adjustment.
|
|
Pre-Collision System Unavailable |
X2025 |
Front Radar Sensor Temporary Unavailable (Horizontal Direction Optical Axis Misalignment) |
The forward recognition camera received a beam axis horizontal misalignment signal from the millimeter wave radar sensor assembly. |
Perform millimeter wave radar sensor assembly beam axis adjustment.
|
|
Pre-Collision System Unavailable Clean Sensor |
X2026 |
Front Radar Sensor Dirt |
The forward recognition camera received a millimeter wave radar sensor assembly dirty signal from the millimeter wave radar sensor assembly. |
Refer to Vehicle Control History code X2026 of front radar sensor system.
|
|
Pre-Collision System Unavailable |
X2027 |
Front Radar Sensor Outside Guaranteed Operating Temperature |
The forward recognition camera received a temperature malfunction signal from the millimeter wave radar sensor assembly. |
Refer to Vehicle Control History code X2027 of front radar sensor system.
|
|
Pre-Collision System Unavailable |
X2028 |
Front Radar Sensor Outside Guaranteed Operating Voltage |
The forward recognition camera received a voltage malfunction signal from the millimeter wave radar sensor assembly. |
Refer to Vehicle Control History code X2028 of front radar sensor system.
|
|
Pre-Collision System Malfunction Visit Your Dealer |
X2070 |
Communication Error from Pre-Collision System to Front Radar Sensor |
Communication malfunction occurred between the forward recognition camera and millimeter wave radar sensor assembly. |
Perform troubleshooting for the front radar sensor system.
|
CLEAR VEHICLE CONTROL HISTORY (PRE-COLLISION SYSTEM)
NOTICE:
By performing this procedure, all stored Vehicle Control History will be cleared.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Pre-Collision System / Utility / Vehicle Control History (RoB) (Clear).
Body Electrical > Pre-Collision System > Utility
|
Tester Display |
|---|
|
Vehicle Control History (RoB) |
(e) According to the display on the Techstream, clear the Vehicle Control History (RoB).
VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)
(a) Part of the control history can be confirmed using the Vehicle Control History.
Click here
![2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for TMC Made Gasoline Model): VEHICLE CONTROL HISTORY](/t3Portal/stylegraphics/info.gif)
|
|