| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001CURT |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 09/2022] |
| Title: CRUISE CONTROL: LANE CONTROL SYSTEM (for Gasoline Model): DATA LIST / ACTIVE TEST; 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022] | ||
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Lane Control / Data List.
(e) According to the display on the Techstream, read the Data List.
Chassis > Lane Control > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Total Distance Traveled |
- |
- |
- |
Cannot be used |
|
Total Distance Traveled - Unit |
- |
- |
- |
Cannot be used |
|
LDA Control |
Lane control system control status |
Prohibit or Permit |
Prohibit: Control prohibited Permit: Control permitted |
- |
|
Turn Switch (Right) |
Right turn signal switch status |
OFF or ON |
ON: Right turn signal switch on OFF: Right turn signal switch off |
- |
|
Turn Switch (Left) |
Left turn signal switch status |
OFF or ON |
ON: Left turn signal switch on OFF: Left turn signal switch off |
- |
|
Vehicle Information (2WD/4WD) |
- |
- |
- |
Cannot be used |
|
Vehicle Information (Conv/HV) |
- |
- |
- |
Cannot be used |
ACTIVE TEST
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Lane Control / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Chassis > Lane Control > Active Test
|
Tester Display |
Measurement Item |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Steering Wheel Vibration |
- |
- |
Cannot be used |
|
Meter Buzzer |
Sounds the meter buzzer |
Start or Stop |
Perform this Active Test with the vehicle is stopped and engine switch on (IG). |
|
|