CRUISE CONTROL: FRONT CAMERA SYSTEM (for Gasoline Model): PRECAUTION; 2019 MY Corolla Corolla Hatchback GR Corolla [06/2018

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

(1) The forward recognition camera has characteristics similar to those of human eyes. When the visibility is poor for the driver, the forward recognition camera may not properly detect lane markers or vehicles and objects on the road ahead.

(2) Only the objects in the forward recognition camera detection area can be detected.

(3) The forward recognition camera has a function to detect foreign matter in the area in front of the forward recognition camera.

The forward recognition camera may not always detect dirt in the area in front of the forward recognition camera.

(b) In the following situations, the forward recognition camera may not detect objects such as a preceding vehicle, pedestrians or lane makers:

(1) When driving in inclement weather such as heavy rain or snow, dense fog, a sandstorm, etc.

(2) When the view of the forward recognition camera is obscured by steam, sand, smoke, water, snow or dust.

(3) When an intensely bright light, such as the sun or high beams of an oncoming vehicle shine directly into the forward recognition camera.

(7) When the road inclination is drastically changed (steep uphill or downhill, etc.)

(8) When the vehicle is being driven where a sudden change in brightness occurs, such as at the entrance or exit of a tunnel or in the shade.

(9) When the ambient temperature is low, the heater is operating with FOOT mode selected.

(1) When the forward recognition camera is facing upward or downward due to inclination of the vehicle when overloaded.

(2) When the vehicle height is not standard due to modified suspension or non-standard tires.

(3) When the windshield glass is covered with water drops, snow, ice, dirt, frost, dust, oil, etc.

(5) When rain drops, washer fluid, or a wiper blade blocks the forward recognition camera.

(6) An object mounted on the roof carrier is obstructing the area in front of the forward recognition camera.

(7) When a headlight is covered with dirt, ice, mud, etc., and the object is not properly illuminated.

(d) The front camera system may not operate properly in any of the following conditions:

(1) The forward recognition camera is misaligned or damaged due to a strong impact being applied to the camera or the area around it.

(a) If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.

(b) Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the vehicle condition at the time the malfunction occurred (DTC outputs etc.).

(c) Be sure to check for DTCs related to other systems. The front camera system may be influenced by malfunctions in other systems.

(a) Before using a chassis dynamometer, cover the area in front of the forward recognition camera to prevent it from operating.

If "Front Camera Unavailable See Owner's Manual" is displayed on the multi-information display, after performing repairs, make sure to clear the Vehicle Control History of the following systems:

Radar Cruise2 (Dynamic radar cruise control system): Click here
Front Recognition Camera (Front camera system): Click here
Lane Control (Lane control system): Click here
Road Sign Assist (Road sign assist system): Click here
Pre-Collision System (Pre-collision system): Click here
w/ AFS:
Front Recognition Camera (Front Lighting Control) (Automatic high beam system): Click here
w/o AFS:
Front Recognition Camera (Front Lighting Control) (Automatic high beam system): Click here

HINT:

The front camera system captures the image ahead of the vehicle using the monocular camera and learns the direction of traffic while driving. When the actual driving situation is different from what is determined by the forward recognition camera, such as when running the vehicle on a chassis dynamometer, the front camera system may learn incorrect information.
When the forward recognition camera is covered, the message "Front Camera Unavailable See Owner's Manual" is displayed on the multi-information display. The message will disappear and the operation of the front camera system will return to normal after the cover is removed.

(a) Make sure that the engine switch is off unless otherwise specified in the inspection procedure.

(b) After removal/installation, check for DTCs and confirm that a normal system code is output.

(1) Do not apply excessive force to the forward recognition camera or subject it to a strong impact.

(3) Do not change the installation position of the forward recognition camera or modify the surrounding components.

(4) Do not touch the forward recognition camera lens when replacing the forward recognition camera.

If the forward recognition camera lens is touched, replace the forward recognition camera with a new one.

(1) If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera adjustment and to clear the vehicle control history.

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition. When clearing vehicle control history, refer to the following links:

(2) When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.

(3) When replacing the forward recognition camera, do not damage the camera lens or allow it to become contaminated with foreign matter.

(4) Do not reuse a forward recognition camera that has been dropped or subjected to a strong impact.

(1) When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or some systems using the forward recognition camera may not operate properly due to a difference in the transmissivity or black ceramic border.

If non-Toyota genuine parts are used, the forward recognition camera view may be blocked, affecting the operation of systems that use the forward recognition camera.

If streaks are left on the windshield glass, the forward recognition camera may not operate properly, affecting the operation of systems that use the forward recognition camera.

The forward recognition camera view may be blocked, affecting the operation of systems that use the forward recognition camera.

(d) Do not allow any objects mounted on the roof rack to obstruct the area in front of the forward recognition camera.

The forward recognition camera view may be blocked, affecting the operation of systems that use the forward recognition camera.

If the windshield glass is dirty, fogged up or has an oily film, the forward recognition camera may not operate properly, affecting the operation of systems that use the forward recognition camera.

(f) Do not attach any stickers or install any accessories to the area of the windshield glass in front of the forward recognition camera.

HINT:

If it is necessary to attach a sticker or install an accessory to the windshield glass, do not attach it to the area in front of the forward recognition camera.
If a sticker or accessory is installed to the windshield glass, the forward recognition camera view may be blocked, affecting the operation of systems that use the forward recognition camera.

(g) Even if a water repellent glass coating is applied to the windshield glass, it is still necessary to use the wipers if the area in front of the forward recognition camera is covered with water droplets.