Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CUQH |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 01/2019] |
Title: CRUISE CONTROL: FRONT RADAR SENSOR SYSTEM (for Gasoline Model): C1A8C46,C1A8D1C,C1A9000,C1A9100; Main Microcomputer in Front Radar Sensor Calibration/Parameter Memory Failure; 2019 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 01/2019] |
DTC
|
C1A8C46
|
Main Microcomputer in Front Radar Sensor Calibration/Parameter Memory Failure
|
DTC
|
C1A8D1C
|
Power Supply Circuit in Front Radar Sensor Circuit Voltage Out of Range
|
DTC
|
C1A9000
|
Malfunction of Millimeter-wave Circuit in Front Radar Sensor
|
DTC
|
C1A9100
|
Malfunction of Acceleration Sensor in Front Radar Sensor
|
DESCRIPTION
When an internal malfunction is detected in the millimeter wave radar sensor assembly, a DTC is stored.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1A8C46
|
Main Microcomputer in Front Radar Sensor Calibration/Parameter Memory Failure
|
When the engine switch is on (IG), the millimeter wave radar sensor assembly detects an internal memory malfunction
|
Millimeter wave radar sensor assembly
|
C1A8D1C
|
Power Supply Circuit in Front Radar Sensor Circuit Voltage Out of Range
|
When the engine switch is on (IG), the millimeter wave radar sensor assembly detects a power source circuit malfunction
|
Millimeter wave radar sensor assembly
|
C1A9000
|
Malfunction of Millimeter-wave Circuit in Front Radar Sensor
|
When the engine switch is on (IG), the millimeter wave radar sensor assembly detects an internal millimeter wave circuit malfunction
|
Millimeter wave radar sensor assembly
|
C1A9100
|
Malfunction of Acceleration Sensor in Front Radar Sensor
|
When the engine switch is on (IG), the millimeter wave radar sensor assembly detects an internal acceleration sensor malfunction
|
Millimeter wave radar sensor assembly
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle and a DTC may be stored.
-
When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the millimeter wave radar sensor beam axis must be performed.
Click here
PROCEDURE
1.
|
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
|
(a) Replace the millimeter wave radar sensor assembly with a new one.
Click here
NEXT |
|
END
|
|