Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CUPP |
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 - 09/2022] |
Title: CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for M20A-FKS): U032251; Software Incompatibility with Body Control Module Not Programmed; 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022] |
DTC
|
U032251
|
Software Incompatibility with Body Control Module Not Programmed
|
DESCRIPTION
If the forward recognition camera cannot verify the vehicle information sent from the main body ECU (multiplex network body ECU), the forward recognition camera stores DTC U032251.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
DTC Output from
|
U032251
|
Software Incompatibility with Body Control Module Not Programmed
|
The vehicle information sent from the main body ECU (multiplex network body ECU) cannot be verified by the forward recognition camera.
|
Forward recognition camera
|
Does not come on
|
Radar Cruise2
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
PROCEDURE
1.
|
REPLACE FORWARD RECOGNITION CAMERA
|
(a) Replace the forward recognition camera with a new one.
Click here
NEXT
|
|
|
(a) Clear the DTCs.
Powertrain > Radar Cruise2 > Clear DTCs
NEXT |
|
END
|
|