| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001CU0B |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 09/2022] |
| Title: EXTERIOR PANELS / TRIM: NAME PLATE (for Hatchback): INSTALLATION; 2019 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2022] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
When installing the name plates, heat the vehicle body, back door panel and name plates using a heat light.
Heating Temperature
|
Item |
Temperature |
|---|---|
|
Vehicle Body |
40 to 60°C (104 to 140°F) |
|
Name Plate |
20 to 30°C (68 to 86°F) |
CAUTION:
- Do not touch the heat light and heated parts, touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
|
*a |
Heated Part |
|
*b |
Heat Light |
NOTICE:
Do not heat the vehicle body, back door panel or name plate excessively.
PROCEDURE
1. INSTALL NO. 4 BACK DOOR NAME PLATE
(a) Clean the back door panel surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any remaining double-sided tape from the back door panel.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Using a heat light, heat the back door panel and a new No. 4 back door name plate.
(c) Remove the release paper from the No. 4 back door name plate.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(d) for SE Plate:
(1) Install the No. 4 back door name plate as shown in the illustration.
Standard Measurement:
|
Area |
Measurement |
Area |
Measurement |
|---|---|---|---|
|
A |
260.5 mm (10.26 in.) |
B |
13.7 mm (0.539 in.) |
|
C |
73.6 mm (2.90 in.) |
D |
64.5 mm (2.54 in.) |
|
E |
8.6 mm (0.339 in.) |
F |
32.0 mm (1.26 in.) |
(e) for XSE Plate:
(1) Install the No. 4 back door name plate as shown in the illustration.
Standard Measurement:
|
Area |
Measurement |
Area |
Measurement |
|---|---|---|---|
|
A |
228.1 mm (8.98 in.) |
B |
15.1 mm (0.595 in.) |
|
C |
106.2 mm (4.18 in.) |
D |
97.1 mm (3.82 in.) |
|
E |
8.3 mm (0.327 in.) |
F |
31.8 mm (1.25 in.) |
2. INSTALL NO. 2 BACK DOOR NAME PLATE
(a) Clean the back door panel surface.
(1) Using a heat light, heat the back door panel surface.
(2) Remove any remaining double-sided tape from the back door panel.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Using a heat light, heat the back door panel and a new No. 2 back door name plate.
(c) Remove the release paper from the No. 2 back door name plate.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(d) for COROLLA Plate:
(1) Install the No. 2 back door name plate as shown in the illustration.
Standard Measurement:
|
Area |
Measurement |
Area |
Measurement |
|---|---|---|---|
|
A |
9.1 mm (0.358 in.) |
B |
165.7 mm (6.52 in.) |
|
C |
17.1 mm (0.673 in.) |
D |
181.7 mm (7.15 in.) |
3. INSTALL SYMBOL EMBLEM
(a) Clean the back door panel surface.
(1) Using a heat light, heat the back door panel surface.
(2) Remove any remaining double-sided tape from the back door panel.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Using a heat light, heat the back door panel and a new symbol emblem.
(c) Remove the release paper from the symbol emblem.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(d) Engage the 2 pins and install the symbol emblem as shown in the illustration.
|
|