| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001CU0A |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 09/2022] |
| Title: EXTERIOR PANELS / TRIM: NAME PLATE (for Hatchback): REMOVAL; 2019 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2022] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
When removing the name plates, heat the vehicle body, back door panel and name plates using a heat light.
Heating Temperature
|
Item |
Temperature |
|---|---|
|
Vehicle Body |
40 to 60°C (104 to 140°F) |
|
Name Plate |
20 to 30°C (68 to 86°F) |
CAUTION:
- Do not touch the heat light and heated parts, touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
|
*a |
Heated Part |
|
*b |
Heat Light |
NOTICE:
Do not heat the vehicle body, back door panel or name plate excessively.
PROCEDURE
1. REMOVE SYMBOL EMBLEM
(a) Apply protective tape around the symbol emblem as shown in the illustration.
|
Protective Tape |
(b) Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the symbol emblem.
NOTICE:
Be careful not to damage the back door panel.
2. REMOVE NO. 2 BACK DOOR NAME PLATE
(a) Apply protective tape around the No. 2 back door name plate as shown in the illustration.
|
*a |
Wooden Block |
|
*b |
Piano Wire |
|
|
Protective Tape |
(b) Insert a piano wire between the back door panel and No. 2 back door name plate.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(d) Pull the piano wire and cut the double-sided tape that holds the No. 2 back door name plate to the back door panel to remove the No. 2 back door name plate.
NOTICE:
Be careful not to damage the back door panel.
3. REMOVE NO. 4 BACK DOOR NAME PLATE
HINT:
Use the same procedure for the RH side and LH side.
(a) Apply protective tape around the No. 4 back door name plate as shown in the illustration.
|
*a |
Wooden Block |
|
*b |
Piano Wire |
|
|
Protective Tape |
(b) Insert a piano wire between the back door panel and No. 4 back door name plate.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(d) Pull the piano wire and cut the double-sided tape that holds the No. 4 back door name plate to the back door panel to remove the No. 4 back door name plate.
NOTICE:
Be careful not to damage the back door panel.
|
|