| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001CMJN |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - ] |
| Title: MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: REMOVAL; 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE OUTER MIRROR
(a) Apply protective tape to the areas shown in the illustration.
|
Protective Tape |
|
Move in this Direction |
(b) Push the upper part of the mirror surface and tilt it.
(c) Using a moulding remover, disengage the 2 claws on the lower part of the outer mirror as shown in the illustration.
NOTICE:
Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.
(d) Push the lower part of the mirror surface and tilt it.
(e) w/o Blind Spot Monitor System and Mirror Heater:
(1) Using a moulding remover, disengage the 2 claws on the upper part of the outer mirror as shown in the illustration to remove the outer mirror.
NOTICE:
Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.
|
|
Move in this Direction |
(f) w/ Blind Spot Monitor System:
(1) Using a moulding remover, disengage the 2 claws on the upper part of the outer mirror as shown in the illustration.
|
|
Move in this Direction |
NOTICE:
Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.
(2) Disengage the claw as shown in the illustration.
|
|
Push in this Direction |
|
(3) Disengage the clamp. |
|
(4) Disconnect the connector to remove the outer mirror.
(g) w/ Mirror Heater:
(1) Using a moulding remover, disengage the 2 claws on the upper part of the outer mirror as shown in the illustration.
NOTICE:
Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.
|
|
Move in this Direction |
|
(2) Disconnect the connector to remove the outer mirror. |
|
|
|