Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001CMJL |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 -
] |
Title: MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: INSPECTION; 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ] |
INSPECTION
PROCEDURE
1. INSPECT OUTER MIRROR RH
(a) Check the outer mirror heater operation. (w/ Mirror Heater)
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
25°C (77°F)
|
10 to 17 Ω
|
If the result is not as specified, replace the outer mirror RH.
|
|
*a
|
Component without harness connected
(Outer Mirror RH)
|
|
|
(b) Check the operation of the outer rear view mirror indicator. (w/ Blind Spot Monitor System)
NOTICE:
Do not apply a voltage of more than 4.5 V.
(1) Connect 3 new 1.5 V dry-cell batteries in series.
(2) Apply 4.5 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.
OK:
Tester Connection
|
Specified Condition
|
4.5 V battery negative (-) → Terminal 1
4.5 V battery positive (+) → Terminal 2
|
Outer rear view mirror indicator comes on
|
If the result is not as specified, replace the outer mirror RH.
|
|
*a
|
Component without harness connected
(Outer Mirror RH)
|
|
|
2. INSPECT OUTER MIRROR LH
(a) Check the outer mirror heater operation. (w/ Mirror Heater )
(1) Measure the resistance according the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
25°C (77°F)
|
10 to 17 Ω
|
If the result is not as specified, replace the outer mirror LH.
|
|
*a
|
Component without harness connected
(Outer Mirror LH)
|
|
|
(b) Check the operation of the outer rear view mirror indicator. (w/ Blind Spot Monitor System)
NOTICE:
Do not apply a voltage of more than 4.5 V.
(1) Connect 3 new 1.5 V dry-cell batteries in series.
(2) Apply 4.5 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.
OK:
Tester Connection
|
Specified Condition
|
4.5 V battery negative (-) → Terminal 1
4.5 V battery positive (+) → Terminal 2
|
Outer rear view mirror indicator comes on
|
If the result is not as specified, replace the outer mirror LH.
|
|
*a
|
Component without harness connected
(Outer Mirror LH)
|
|
|
|