| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001C9SL |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 09/2022] |
| Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (for Gasoline Model): B132187; Lost Communication with EMV Missing Message; 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022] | ||
|
DTC |
B132187 |
Lost Communication with EMV Missing Message |
DESCRIPTION
The combination meter assembly and radio and display receiver assembly communicate via local bus communication. This allows audio and visual system or navigation system information to be displayed on the multi-information display.
This DTC is stored when a communication error occurs between the radio and display receiver assembly and combination meter assembly.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
B132187 |
Lost Communication with EMV Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
PROCEDURE
|
1. |
CONFIRM MODEL |
(a) Choose the model to be inspected.
|
Result |
Proceed to |
|---|---|
|
w/ Navigation System |
A |
|
w/o Navigation System |
B |
| B |
|
|
|
2. |
CHECK FOR DTC (NAVIGATION SYSTEM) |
(a) Check if navigation system DTCs are output.
Body Electrical > Navigation System > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| A |
|
| B |
|
GO TO NAVIGATION SYSTEM
|
|
3. |
CHECK FOR DTC (AUDIO AND VISUAL SYSTEM) |
(a) Check if audio and visual system DTCs are output.
Body Electrical > Navigation System > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
GO TO AUDIO AND VISUAL SYSTEM
|
|
|
4. |
CONFIRM MODEL |
(a) Choose the model to be inspected.
|
Result |
Proceed to |
|---|---|
|
w/ Headup Display System |
A |
|
w/o Headup Display System |
B |
| B |
|
|
|
5. |
CHECK FOR DTC (HEADUP DISPLAY SYSTEM) |
(a) Check if headup display system DTCs are output.
Body Electrical > Head Up Display > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTC B132187 is not output |
A |
|
DTC B132187 is output |
B |
| A |
|
REPLACE COMBINATION METER ASSEMBLY
|
| B |
|
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
|
|
6. |
REPLACE COMBINATION METER ASSEMBLY |
(a) Replace the combination meter assembly with a new one.
Click here
![2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL](/t3Portal/stylegraphics/info.gif)
(b) Turn the engine switch on (IG) and wait 30 seconds.
NOTICE:
A minimum of 30 seconds is required to send/receive the registration information between the combination meter assembly and radio and display receiver assembly.
(c) Operate the steering pad switch and check that the audio tab illuminates.
(d) Check if meter / gauge system DTCs are output.
Body Electrical > Combination Meter > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
The audio tab illuminates and DTC B132187 is not output |
A |
|
The audio tab does not illuminate and DTC B132187 is output |
B |
| A |
|
END (COMBINATION METER ASSEMBLY WAS DEFECTIVE) |
| B |
|
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
|
|
|