| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001BH0G |
| Model Year Start: 2019 | Model: Corolla Hatchback | Prod Date Range: [06/2018 - ] |
| Title: M20A-FKS (ENGINE CONTROL): CAMSHAFT POSITION SENSOR: REMOVAL; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)
|
(a) Disconnect the camshaft position sensor connector. |
|
(b) Using an 8 mm socket wrench, remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
NOTICE:
If the camshaft position sensor has been struck or dropped, replace it.
2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)
|
(a) Disconnect the camshaft position sensor connector. |
|
(b) Using an 8 mm socket wrench, remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
NOTICE:
If the camshaft position sensor has been struck or dropped, replace it.
|
|