Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001BH0G |
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 -
] |
Title: M20A-FKS (ENGINE CONTROL): CAMSHAFT POSITION SENSOR: REMOVAL; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ] |
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
PROCEDURE
1. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)
(a) Disconnect the camshaft position sensor connector.
|
|
(b) Using an 8 mm socket wrench, remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
NOTICE:
If the camshaft position sensor has been struck or dropped, replace it.
2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)
(a) Disconnect the camshaft position sensor connector.
|
|
(b) Using an 8 mm socket wrench, remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
NOTICE:
If the camshaft position sensor has been struck or dropped, replace it.
|