INSTALLATION

PROCEDURE

1. INSTALL NO. 1 ECM BRACKET

(a) Install the No. 1 ECM bracket to the ECM with the 2 screws.

Torque:

4.5 N·m {46 kgf·cm, 40 in·lbf}

2. INSTALL NO. 2 ECM BRACKET

(a) Install the No. 2 ECM bracket to the ECM with the 2 screws.

Torque:

4.5 N·m {46 kgf·cm, 40 in·lbf}

3. INSTALL ECM

(a) Engage the guide to install the ECM.

NOTICE:

If the ECM has been struck or dropped, replace it.

(b) Install the bolt and nut.

Torque:

Bolt :

12.5 N·m {127 kgf·cm, 9 ft·lbf}

Nut :

8.0 N·m {82 kgf·cm, 71 in·lbf}

(c) Install the grommet.

*1 Grommet

(d) Engage the wire harness clamp and install the engine wire with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(e) Connect the 2 ECM connectors and lower the 2 lock levers.

(f) Engage the 2 claws to connect the engine wire to the No. 1 engine room relay block and No. 1 junction block assembly.

(g) Connect the 3 connectors to the No. 1 engine room relay block and No. 1 junction block assembly.

(h) Engage the 2 guides and claw to install the No. 1 relay block cover to the No. 1 engine room relay block and No. 1 junction block assembly.

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

(a) Engage the guide to install the air cleaner case sub-assembly.

(b) Install the 2 bolts.

Torque:

4.0 N·m {41 kgf·cm, 35 in·lbf}

5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Click here

6. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Click here

7. INSTALL INLET NO. 1 AIR CLEANER

Click here

8. INSTALL RADIATOR SUPPORT OPENING COVER

Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click here

10. PERFORM INITIALIZATION

Click here