Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001BGZP
Model Year Start: 2019 Model: Corolla Hatchback Prod Date Range: [06/2018 -           ]
Title: M20A-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID: REMOVAL; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]

REMOVAL

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

PROCEDURE

1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

(a) Disconnect the cam timing oil control solenoid assembly connector.

(b) Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing chain cover assembly.

NOTICE:

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.

2. REMOVE O-RING

HINT:

Perform this procedure only when replacement of the O-ring is necessary.

(a) Remove the O-ring from the cam timing oil control solenoid assembly.

NOTICE:

  • When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.
  • If the O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.