Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001BGZP |
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 -
] |
Title: M20A-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID: REMOVAL; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ] |
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
PROCEDURE
1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
(a) Disconnect the cam timing oil control solenoid assembly connector.
|
|
(b) Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing chain cover assembly.
NOTICE:
If the cam timing oil control solenoid assembly has been struck or dropped, replace it.
2. REMOVE O-RING
HINT:
Perform this procedure only when replacement of the O-ring is necessary.
(a) Remove the O-ring from the cam timing oil control solenoid assembly.
NOTICE:
-
When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.
-
If the O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.
|
|
|