Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001AULO |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 09/2022] |
Title: LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with AFS): B243D,B243E; Left Low Beam Fan Malfunction; 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022] |
DTC
|
B243D
|
Left Low Beam Fan Malfunction
|
DTC
|
B243E
|
Right Low Beam Fan Malfunction
|
DESCRIPTION
The headlight ECU sub-assembly operates the low beam fan to cool the headlight LED unit in order to prevent the headlight LED unit from overheating.
Illuminates the low beam headlights and continuously operates the low beam fan.
The headlight ECU sub-assembly monitors the pulse signals from the FANP terminal when the low beam fans are operating.
HINT:
If B243D or B243E is output, the headlight ECU sub-assembly performs low beam headlight dimming control.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
DTC Output from
|
B243D
|
Left Low Beam Fan Malfunction
|
Detection condition:
-
All of the following conditions are met:
-
Engine switch on (IG)
-
Low beam headlights on
Malfunction status:
-
Fan speed signals from the low beam fan of less than 2550 rpm are continuously detected
|
-
Headlight ECU sub-assembly LH
-
Headlight unit assembly LH
|
AFS
|
B243E
|
Right Low Beam Fan Malfunction
|
Detection condition:
-
All of the following conditions are met:
-
Engine switch on (IG)
-
Low beam headlights on
Malfunction status:
-
Fan speed signals from the low beam fan of less than 2550 rpm are continuously detected
|
-
Headlight ECU sub-assembly RH
-
Headlight unit assembly RH
|
AFS (Sub)
|
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
-
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
Click here
-
When replacing the headlight ECU sub-assembly LH, always replace it with a new one. If a headlight ECU sub-assembly LH which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
PROCEDURE
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS or AFS (Sub) / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Body Electrical > AFS (Sub) > Clear DTCs
NEXT
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / AFS or AFS (Sub) / Trouble Codes.
(f) Check for DTCs.
Body Electrical > AFS > Trouble Codes
Body Electrical > AFS (Sub) > Trouble Codes
OK:
DTC B243D and B243E are not output.
Result
|
Proceed to
|
OK
|
A
|
NG (DTC B243D is output)
|
B
|
NG (DTC B243E is output)
|
C
|
B
|
|
|
3.
|
CHECK HEADLIGHT UNIT ASSEMBLY LH
|
(a) Interchange the headlight unit assembly LH with RH and connect the connectors.
Click here
NEXT
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS or AFS (Sub) / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Body Electrical > AFS (Sub) > Clear DTCs
NEXT
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / AFS or AFS (Sub) / Trouble Codes.
(f) Check for DTCs.
Body Electrical > AFS > Trouble Codes
Body Electrical > AFS (Sub) > Trouble Codes
Result
|
Proceed to
|
DTC B243D is output
|
A
|
DTC B243E is output
|
B
|
6.
|
CHECK HEADLIGHT UNIT ASSEMBLY RH
|
(a) Interchange the headlight unit assembly RH with LH and connect the connectors.
Click here
NEXT
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS or AFS (Sub) / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Body Electrical > AFS (Sub) > Clear DTCs
NEXT
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / AFS or AFS (Sub) / Trouble Codes.
(f) Check for DTCs.
Body Electrical > AFS > Trouble Codes
Body Electrical > AFS (Sub) > Trouble Codes
Result
|
Proceed to
|
DTC B243E is output
|
A
|
DTC B243D is output
|
B
|
|