| Last Modified: 08-22-2025 | 6.11:8.1.0 | Doc ID: RM0000003TPDFPO |
| Model Year Start: 2026 | Model: GR Corolla | Prod Date Range: [08/2025 - ] |
| Title: BRAKE SYSTEM (OTHER): VACUUM PUMP (for G16E-GTS): REMOVAL; 2026 MY GR Corolla [08/2025 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Click here
![2026 MY GR Corolla [08/2025 - ]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE NO. 4 INLET AIR CLEANER
Click here
3. REMOVE RADIATOR SUPPORT OPENING COVER
Click here
4. REMOVE INLET NO. 1 AIR CLEANER
Click here
5. REMOVE AIR CLEANER WITH AIR CLEANER HOSE
Click here
6. SEPARATE FUEL TUBE SUB-ASSEMBLY
|
(a) Disengage the clamp to separate the fuel tube sub-assembly. |
|
7. SEPARATE NO. 1 FUEL VAPOR FEED HOSE
|
(a) Disengage the 2 clamps to separate the No. 1 fuel vapor feed hose. |
|
8. SEPARATE ENGINE WIRE
|
(a) Remove the bolt to separate the engine wire. |
|
9. SEPARATE NO. 1 WATER BY-PASS PIPE
|
(a) Remove the bolt and nut to separate the No. 1 water by-pass pipe. |
|
(b) Disengage the clamp to separate the vacuum hose.
10. DISCONNECT CHECK VALVE TO CONNECTOR TUBE HOSE
|
(a) Slide the clip and disconnect the check valve to connector tube hose from the vacuum pump assembly. |
|
11. REMOVE VACUUM PUMP ASSEMBLY
|
(a) Disconnect the vacuum hose from the vacuum pump assembly. |
|
|
(b) Remove the 4 bolts and vacuum pump assembly from the engine assembly. |
|
|
(c) Remove the No. 2 and No. 3 vacuum pump O-rings from the vacuum pump assembly. |
|
|
|