|
Last Modified: 05-08-2025 |
6.11:8.1.0 |
Doc ID: RM100000002QS2U |
|
Model Year Start: 2024 |
Model: RAV4 |
Prod Date Range: [10/2023 -
] |
|
Title: MAINTENANCE: DIFFERENTIAL OIL: REPLACEMENT; 2024 - 2025 MY RAV4 RAV4 HV [10/2023 - ] |
REPLACEMENT
PROCEDURE
1. DRAIN DIFFERENTIAL OIL (except Torque Vectoring Differential)
(a) Stop the vehicle on a level surface.
|
(b) Using a 10 mm socket hexagon wrench, remove the rear differential filler plug and gasket.
|
|
|
(c) Using a 10 mm socket hexagon wrench, remove the rear differential drain plug and gasket.
|
|
(d) Drain the differential oil.
(e) Install a new gasket and the rear differential drain plug.
Torque:
39 N·m {398 kgf·cm, 29 ft·lbf}
2. DRAIN DIFFERENTIAL OIL (for Torque Vectoring Differential)
(a) Stop the vehicle on a level surface.
|
(c) Move aside the No. 2 differential disconnect cover.
|
|
|
(d) Using a 10 mm socket hexagon wrench, remove the rear differential filler plug and gasket.
|
|
|
(e) Using a 10 mm socket hexagon wrench, remove the rear differential drain plug and gasket.
|
|
(f) Drain the differential oil.
(g) Install a new gasket and the rear differential drain plug.
Torque:
39 N·m {398 kgf·cm, 29 ft·lbf}
3. ADD DIFFERENTIAL OIL (except Torque Vectoring Differential)
|
(a) Add the differential oil so that the oil level is within 0 to 5 mm (0 to 0.196 in.) of the bottom of the filler hole.
NOTICE:
Excessively large or small quantities of oil may cause problems.
Oil capacity (Reference):
0.45 to 0.55 liters (0.48 to 0.58 US qts., 0.40 to 0.48 Imp. qts.)
Oil type:
Toyota Genuine Differential Gear Oil LT SAE 75W-85 API GL-5, Toyota Genuine Differential Gear Oil LX SAE 75W-85 API GL-5 or equivalent
|
|
|
*a
|
0 to 5 mm (0 to 0.196 in.)
|
|
|
|
(b) Using a 10 mm socket hexagon wrench, install a new gasket and the rear differential filler plug.
Torque:
39 N·m {398 kgf·cm, 29 ft·lbf}
|
|
(c) Drive the vehicle and check the oil level again. If necessary, add differential oil.
4. ADD DIFFERENTIAL OIL (for Torque Vectoring Differential)
|
(a) Add the differential oil so that the oil level is within 0 to 5 mm (0 to 0.196 in.) of the bottom of the filler hole.
NOTICE:
-
Excessively large or small quantities of oil may cause problems.
-
Using differential oil other than the specified oil may cause abnormal noise or vibration, or damage the differential of your vehicle.
Oil capacity (Reference):
0.50 to 0.54 liters (0.53 to 0.57 US qts, 0.44 to 0.47 Imp. qts)
Oil type:
Toyota Genuine Differential Gear Oil LX
|
|
|
*a
|
0 to 5 mm (0 to 0.196 in.)
|
|
|
|
(b) Move aside the No. 2 differential disconnect cover.
|
|
|
(c) Using SST, 10 mm straight hexagon wrench and union nut wrench, install a new gasket and the rear differential filler plug.
SST: 09961-00950
Torque:
Specified tightening torque :
39 N·m {398 kgf·cm, 29 ft·lbf}
|
|
|
*a
|
10 mm Straight Hexagon Wrench
|
|
*b
|
Union Nut Wrench
|
|
*c
|
Torque Wrench Fulcrum Length
|
|
|
|
(d) Install the 2 bolts.
Torque:
19.6 N·m {200 kgf·cm, 14 ft·lbf}
|
|
(e) Drive the vehicle and check the oil level again. If necessary, add differential oil.
|