TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL; 2024 - 2025 MY RAV4 RAV4 HV [10/2023

Last Modified: 05-08-2025	6.11:8.1.0	Doc ID: RM100000002PR20
Model Year Start: 2024	Model: RAV4	Prod Date Range: [10/2023 - ]
Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL; 2024 - 2025 MY RAV4 RAV4 HV [10/2023 - ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the tire pressure warning receiver removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model:)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Tire pressure warning ECU and receiver

Register transmitter ID
Initialize tire pressure warning system

When DTC detection conditions of "transmitter ID not received" DTC are met, TPWS indicator blinks for 1 minute, and then illuminates.
Tire pressure warning function

for Initialization:

for Registration:

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model:)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Tire pressure warning ECU and receiver

Register transmitter ID
Initialize tire pressure warning system

When DTC detection conditions of "transmitter ID not received" DTC are met, TPWS indicator blinks for 1 minute, and then illuminates.
Tire pressure warning function

for Initialization:

for Registration:

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

Click here

2. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click here

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Click here

4. REMOVE DECK BOARD ASSEMBLY

Click here

5. REMOVE REAR NO. 2 FLOOR BOARD

Click here

6. REMOVE REAR DECK FLOOR BOX (w/o Spare Tire)

Click here

7. REMOVE REAR FLOOR FINISH PLATE

Click here

8. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

Click here

9. REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.

Click here

10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Pull back the No. 3 rear seat side garnish RH so that the rear door opening trim weatherstrip RH can be removed.
Use the same procedure described for the LH side.
Click here

11. REMOVE REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.

Click here

12. REMOVE TETHER ANCHOR BRACKET SET

Click here

13. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

Click here

14. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

Click here

15. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click here

16. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:

Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

(a) Remove the bolt.

	Bolt
	Connector

(b) Detach the 2 guides and tire pressure warning ECU and receiver.