Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000002EW66
Model Year Start: 2024 Model: RAV4 Prod Date Range: [10/2023 -           ]
Title: A25A-FKS (BATTERY / CHARGING): BATTERY CURRENT SENSOR: INSTALLATION; 2024 MY RAV4 [10/2023 -        ]

INSTALLATION

PROCEDURE

1. INSTALL BATTERY STATE SENSOR ASSEMBLY

(a) Attach the 2 claws and install the battery state sensor assembly to the battery current sensor holder.

(b) Attach the clamp and connect the engine wire to the battery state sensor assembly.

(c) Connect the battery state sensor assembly connector.

(d) Install the battery state sensor assembly to the battery and tighten the nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

(e) Connect the engine wire and earth wire to the battery state sensor assembly with the nut.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here 2024 MY RAV4 RAV4 HV [10/2023 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION