Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000002EKG8 |
Model Year Start: 2024 |
Model: RAV4 |
Prod Date Range: [10/2023 -
] |
Title: SEAT: FRONT SEAT CUSHION HEATER (for Power Seat): REMOVAL; 2024 MY RAV4 RAV4 HV [10/2023 - ] |
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front seat cushion heater assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Disconnect cable from negative (-) auxiliary battery terminal
|
Perform steering sensor zero point calibration
|
Lane control system
|
|
Parking support brake system (for HV model)*
|
Pre-collision system
|
Reset back door close position
|
Power back door system
|
|
Back door lock initialization
|
Power door lock control system
|
|
-
Reclining motor (Front seatback frame sub-assembly (driver seat)) (Including removal and installation)
-
Slide motor (Front seat adjuster assembly (driver seat)) (Including removal and installation)
|
Initialize position control ECU
|
Front power seat control system (for HV model with memory)
|
|
Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Disconnect cable from negative (-) auxiliary battery terminal
|
Drive the vehicle until stop and start control is permitted (approximately 5 to 60 minutes)
|
Stop and start system
|
|
Perform steering sensor zero point calibration
|
Lane control system
|
|
Parking support brake system (for Gasoline model)*1
|
Pre-collision system
|
Reset back door close position
|
Power back door system
|
|
Back door lock initialization*2
|
Power door lock control system
|
|
-
Reclining motor (Front seatback frame sub-assembly (driver seat)) (Including removal and installation)
-
Slide motor (Front seat adjuster assembly (driver seat)) (Including removal and installation)
|
Initialize position control ECU
|
Front power seat control system (for Gasoline model with memory)
|
|
HINT:
-
Use the same procedure for the RH and LH sides.
-
The following procedure is for the LH side.
PROCEDURE
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing.
Click here
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
2. REMOVE FRONT SEAT ASSEMBLY LH
Click here
3. REMOVE FRONT SEAT FRONT CUSHION SHIELD LH
Click here
4. REMOVE FRONT SEAT CUSHION SHIELD LH
Click here
5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH
Click here
6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Click here
7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Click here
8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Click here
9. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) for Standard Seat Type:
(1) w/o Climate Control Seat System:
Remove the 16 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover.
NOTICE:
Be careful not to damage the separate type front seat cushion cover and front seat cushion heater assembly LH.
|
|
(2) w/ Climate Control Seat System:
Remove the 19 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover.
NOTICE:
Be careful not to damage the separate type front seat cushion cover and front seat cushion heater assembly LH.
|
|
(b) for Sports Seat Type:
(1) w/o Climate Control Seat System:
Remove the 16 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover.
NOTICE:
Be careful not to damage the separate type front seat cushion cover and front seat cushion heater assembly LH.
|
|
(2) w/ Climate Control Seat System:
Remove the 19 tag pins and front seat cushion heater assembly LH from the separate type front seat cushion cover.
NOTICE:
Be careful not to damage the separate type front seat cushion cover and front seat cushion heater assembly LH.
|
|
|