- Multiplex network door ECU
- Power back door unit assembly LH
- Power back door unit assembly RH
| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000002EKCC |
| Model Year Start: 2024 | Model: RAV4 | Prod Date Range: [10/2023 - ] |
| Title: DOOR / HATCH: BACK DOOR: DISASSEMBLY; 2024 MY RAV4 RAV4 HV [10/2023 - ] | ||
DISASSEMBLY
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the multiplex network door ECU removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedures |
Necessary Procedures |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
|
Reset connection history |
There are cases where the connection history display differs from the vehicle condition |
|
|
Reset back door close position |
Power back door system |
|
|
|
Television camera assembly (Including removal and installation) |
|
Parking assist monitor system |
|
|
Television camera view adjustment |
Panoramic view monitor system (for HV model) |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedures |
Necessary Procedures |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Reset connection history |
There are cases where the connection history display differs from the vehicle condition |
|
|
Reset back door close position |
Power back door system |
|
|
|
Television camera assembly (Including removal and installation) |
|
Parking assist monitor system |
|
|
Television camera view adjustment |
Panoramic view monitor system (for Gasoline model) |
|
PROCEDURE
1. REMOVE BACK DOOR CENTER GARNISH
(a) Detach the claw and clip to remove the back door center garnish as shown in the illustration.
|
*A |
w/o Digital Inner Mirror |
|
*B |
w/ Digital Inner Mirror |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
2. REMOVE BACK DOOR SIDE GARNISH LH
(a) Place your hand at the position shown in the illustration, to detach the claw and guide.
|
Place Hand Here |
|
|
Remove in this Direction |
(b) Place your hand at the position shown in the illustration, to detach the claw and guide.
|
|
Place Hand Here |
|
|
Remove in this Direction |
(c) Detach the clip and remove the back door side garnish LH as shown in the illustration.
|
|
Remove in this Direction |
|
(d) Remove the 2 clips from the back door side garnish LH. NOTICE: If the back door side garnish LH has been removed, replace the clip with a new one. |
|
3. REMOVE BACK DOOR SIDE GARNISH RH
HINT:
Use the same procedure described for the LH side.
4. REMOVE BACK DOOR GRIP BASE
(a) Using a moulding remover A, detach the claw and clip to remove the back door grip base as shown in the illustration.
|
|
Remove in this Direction |
5. REMOVE BACK DOOR GRIP
HINT:
Use the same procedure described for the back door grip base.
6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
|
(a) Remove the 4 bolts. |
|
|
(b) Detach the clip and remove the back door trim board assembly. |
|
7. REMOVE BACK DOOR ASSIST GRIP LH
|
(a) Detach the claw and guide to remove the back door assist grip LH. |
|
8. REMOVE BACK DOOR ASSIST GRIP RH
HINT:
Use the same procedure described for the LH side.
9. REMOVE BACK DOOR SERVICE HOLE COVER LH
|
(a) Detach the claw and guide to remove the back door service hole cover LH. |
|
10. REMOVE BACK DOOR SERVICE HOLE COVER RH
HINT:
Use the same procedure described for the LH side.
11. REMOVE BACK DOOR NO. 2 SERVICE HOLE COVER
|
(a) Detach the claw and guide to remove the back door No. 2 service hole cover. |
|
12. REMOVE NO. 1 POWER BACK DOOR CONTROL SWITCH (w/ Power Back Door)
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; DOOR / HATCH: POWER BACK DOOR CLOSER SWITCH: REMOVAL+](/t3Portal/stylegraphics/info.gif)
13. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
Click here
14. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
HINT:
Use the same procedure described for the LH side.
15. REMOVE REAR SPOILER SUB-ASSEMBLY
Click here
16. REMOVE INNER MIRROR CAMERA ASSEMBLY (w/ Digital inner mirror)
Click here
17. REMOVE REAR WASHER NOZZLE
|
(a) Disconnect the rear washer hose from the rear washer nozzle. |
|
(b) Detach the claw and remove the rear washer nozzle.
18. REMOVE REAR WIPER ARM HEAD CAP
Click here
19. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
Click here
20. REMOVE REAR WIPER MOTOR ASSEMBLY
Click here
21. REMOVE REAR WIPER MOTOR GROMMET
Click here
22. REMOVE BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
Click here
23. REMOVE BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
Click here
24. REMOVE MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)
Click here
25. REMOVE BACK DOOR WEIGHT
|
(a) Remove the 3 bolts. |
|
(b) Detach the guide and remove the back door weight.
26. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Click here
27. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH
Click here
28. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
29. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
Click here
30. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
Click here
31. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (w/o Rear View Monitor System)
|
(a) Remove the 2 screws. |
|
(b) Detach the claw and remove the 2 screw grommets.
|
|
Remove in this Direction |
(c) Remove the back door outside garnish protector.
32. REMOVE REAR LIGHT ASSEMBLY LH
Click here
33. REMOVE REAR LIGHT ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
34. REMOVE BACK DOOR LOWER OUTSIDE GARNISH SUB-ASSEMBLY
Click here
35. REMOVE BACK DOOR STAY ASSEMBLY LH (w/o Power Back Door)
Click here
36. REMOVE BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)
HINT:
Use the same procedure described for the LH side.
37. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET LH (w/o Power Back Door)
Click here
38. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET RH (w/o Power Back Door)
HINT:
Use the same procedure described for the LH side.
39. REMOVE BACK DOOR LOWER DAMPER STAY BRACKET LH (w/o Power Back Door)
Click here
40. REMOVE BACK DOOR LOWER DAMPER STAY BRACKET RH (w/o Power Back Door)
HINT:
Use the same procedure described for the LH side.
41. REMOVE BACK DOOR STAY STOPPER (w/o Power Back Door)
Click here
42. REMOVE POWER BACK DOOR UNIT ASSEMBLY LH (w/ Power Back Door)
Click here
43. REMOVE POWER BACK DOOR UNIT ASSEMBLY RH (w/ Power Back Door)
HINT:
Use the same procedure described for the LH side.
44. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET LH (w/ Power Back Door)
Click here
45. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET RH (w/ Power Back Door)
HINT:
Use the same procedure described for the LH side.
46. REMOVE BACK DOOR LOWER DAMPER STAY BRACKET LH (w/ Power Back Door)
Click here
47. REMOVE BACK DOOR LOWER DAMPER STAY BRACKET RH (w/ Power Back Door)
HINT:
Use the same procedure described for the LH side.
48. REMOVE BACK DOOR STAY STOPPER (w/ Power Back Door)
Click here
49. REMOVE BACK DOOR DUST PROOF SEAL
|
(a) Detach the claw and remove the back door dust proof seal. |
|
50. REMOVE BACK DOOR DUST PROOF SEAL
|
(a) Detach the claw and guide to remove the back door dust proof seal. HINT: Use the same procedure for the RH and LH sides. |
|
51. REMOVE BACK DOOR LOWER STOPPER CUSHION
|
(a) Detach the claw and remove the back door lower stopper cushion. HINT: Use the same procedure for the RH and LH sides. |
|
|
|