Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM1000000027O81 |
Model Year Start: 2023 |
Model: RAV4 |
Prod Date Range: [10/2022 -
] |
Title: TELEMATICS: TELEMATICS SYSTEM: Warning Notification Function Malfunction; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 - ] |
Warning Notification Function Malfunction
|
PROCEDURE
1.
|
CHECK PROBLEM SYMPTOM (WARNING NOTIFICATION FUNCTION)
|
(a) Check the problem symptom.
(1) Check the problem symptom of the warning notification function.
Result
|
Proceed to
|
The multi-display screen does not show a warning message even though a warning light turns on or the multi-information display indicates a warning.
|
A
|
The multi-display screen shows a warning message even though a warning light is not on and the multi-information display does not indicate a warning.
|
B
|
The multi-display screen shows a warning message different from the warning light or the multi-information display.
|
HINT:
-
The warning notification function sends information to the service center through communication.
-
Carefully confirm the conditions that caused the malfunction in order to determine if a temporary problem with the radio wave signal conditions caused the malfunction.
A
|
|
|
(a) Check if the indicated warning light or message is listed in the following table.
HINT:
Only messages listed in the table are included in the warning notification function.
for HV Model:
Warning Name
|
Engine warning
|
Hybrid control system warning
|
Hybrid control system warning 2
|
Brake system warning
|
VSC warning
|
ABS warning
|
ECB warning
|
EPS warning
|
Charging system warning
|
Airbag warning
|
PCS warning
|
Cruise warning
|
Intuitive parking assist system warning
|
Drive start control system
|
Brake override system warning
|
Smart key system warning
|
Grille shutter system warning
|
AFS warning
|
Automatic headlight beam level control system warning
|
Automatic high beam system warning
|
LED headlight warning
|
Dynamic torque control AWD system warning
|
Tire pressure system warning
|
Electric parking brake warning
|
Auto hold warning
|
BSM system warning
|
Intelligent clearance sonar system warning
|
Secondary collision brake warning
|
Vehicle proximity notification system warning
|
Engine maintenance warning
|
LTA system warning
|
RSA system warning
|
RCTA warning
|
Engine oil level warning
|
Brake fluid warning
|
Engine oil pressure warning
|
Tire pressure low warning
|
Washer fluid level warning
|
Hybrid battery diagnostic request warning
|
High coolant temperature warning
|
Hybrid system temperature warning
|
Hybrid battery cooling fan maintenance warning
|
Towing prohibited warning
|
Maintenance advice warning
|
for Gasoline Model:
Warning Name
|
Engine warning
|
Brake system warning
|
VSC warning
|
ABS warning
|
EPS warning
|
Charging system warning
|
Airbag warning
|
PCS warning
|
Cruise warning
|
Intuitive parking assist system warning
|
Drive start control system
|
Brake override system warning
|
Smart key system warning
|
Grille shutter system warning
|
AFS warning
|
Automatic high beam system warning
|
LED headlight warning
|
Dynamic torque control AWD system warning
|
Tire pressure system warning
|
Electric parking brake warning
|
Auto hold warning
|
BSM system warning
|
Stop and start system warning
|
Intelligent clearance sonar system warning
|
Secondary collision brake warning
|
Engine maintenance warning
|
LTA system warning
|
RSA system warning
|
RCTA warning
|
Engine oil level warning
|
Brake fluid warning
|
Engine oil pressure warning
|
Tire pressure low warning
|
Washer fluid level warning
|
High coolant temperature warning
|
Maintenance advice warning
|
Result
|
Proceed to
|
Warning light or message is listed in the table.
|
A
|
Warning light or message is not listed in the table.
|
B
|
B |
|
END
|
A
|
|
|
3.
|
CHECK CAN COMMUNICATION SYSTEM
|
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Bus Check.
(e) Check that all ECUs and sensors that use CAN communication are connected.
for HV Model: Click here
for Gasoline Model: Click here
Result
|
Proceed to
|
There are no connection problems.
|
A
|
There is a connection problem.
|
B
|
B |
|
GO TO CAN COMMUNICATION SYSTEM
for HV Model: Click here
for Gasoline Model: Click here
|
A
|
|
|
4.
|
CHECK METER WARNING LIGHT
|
(a) Check that the warning light of the combination meter assembly illuminates and a message displays on the multi-information display when there is a malfunction, and do not when there is not a malfunction.
OK:
There are no problems with warning lights or warning messages.
HINT:
The warning notification function of the telematics system uses the warning notification signals sent and received by the meter/gauge system. Therefore, if the meter/gauge system is not operating normally, the warning notification function will not operate normally.
Result
|
Proceed to
|
OK
|
A
|
NG
|
B
|
A
|
|
|
5.
|
CHECK AUDIO AND VISUAL SYSTEM
|
(a) Check if the audio and visual system is operating and functioning normally.
OK:
The audio and visual system is normal.
6.
|
CHECK METER WARNING LIGHT
|
(a) Check that the warning light of the combination meter assembly illuminates and a message displays on the multi-information display when there is a malfunction, and do not when there is not a malfunction.
OK:
There are no problems with warning lights or warning messages.
HINT:
The warning notification function of the telematics system uses the warning notification signals sent and received by the meter/gauge system. Therefore, if the meter/gauge system is not operating normally, the warning notification function will not operate normally.
|