Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM1000000026OLD |
Model Year Start: 2023 |
Model: RAV4 |
Prod Date Range: [10/2022 -
] |
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B154711,B154713; GNSS Antenna Circuit Short to Ground; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 - ] |
DTC
|
B154711
|
GNSS Antenna Circuit Short to Ground
|
DTC
|
B154713
|
GNSS Antenna Circuit Open
|
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
DTC Output from
|
Priority
|
B154711
|
GNSS Antenna Circuit Short to Ground
|
Short in GNSS antenna assembly
(2 trip detection logic)
|
-
Roof antenna assembly
-
Antenna cord sub-assembly
-
Radio and display receiver assembly
|
Navigation System
|
A
|
B154713
|
GNSS Antenna Circuit Open
|
Open in GNSS antenna assembly
(2 trip detection logic)
|
-
Roof antenna assembly
-
Antenna cord sub-assembly
-
Radio and display receiver assembly
|
Navigation System
|
A
|
WIRING DIAGRAM
CAUTION / NOTICE / HINT
HINT:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
Pre-procedure1
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
Procedure1
(b) Check for DTCs.
Body Electrical > Navigation System > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
Post-procedure1
(c) None
B
|
|
|
2.
|
INSPECT NAVIGATION ANTENNA ASSEMBLY
|
Click here
OK
|
|
|
3.
|
INSPECT ANTENNA CORD SUB-ASSEMBLY
|
Pre-procedure1
(a) Disconnect the antenna connector from the navigation antenna assembly.
|
|
*a
|
Front view of antenna cord sub-assembly connector
(to Navigation Antenna Assembly)
|
*b
|
Front view of antenna cord sub-assembly connector
(to Radio and Display Receiver Assembly)
|
|
|
(b) Disconnect the antenna connector from the radio and display receiver assembly.
Procedure1
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
A-2 - B-1 (GPS)
|
Always
|
Below 1 Ω
|
A-2a - B-1a
|
Always
|
Below 1 Ω
|
A-2 - Body ground
|
Always
|
10 kΩ or higher
|
Post-procedure1
(d) None
|