Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM10000000258C3
Model Year Start: 2023 Model: RAV4 Prod Date Range: [10/2022 -           ]
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: INSPECTION; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 -        ]

INSPECTION

PROCEDURE

1. INSPECT NAVIGATION ANTENNA ASSEMBLY (w/o Mayday System)

(a) Current consumption check: (GPS)

(1) Measure the current consumption according to the value(s) in the table below.

Standard Current:

Tester Connection

Condition

Specified Condition

3 (core) - 3a (shield)

4.2 to 5 V applied between terminals 3 and 3a

10 to 30 mA

NOTICE:

Do not apply a voltage of 6 V or higher between terminals 3 and 3a.

HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.

If the result is not as specified, replace the navigation antenna assembly.

*a

Component without harness connected

(Navigation Antenna Assembly)

*b

Voltage Applied between Terminals

2. INSPECT NAVIGATION ANTENNA ASSEMBLY (w/ Mayday System)

(a) Current consumption check: (GPS1)

(1) Measure the current consumption according to the value(s) in the table below.

Standard Current:

Tester Connection

Condition

Specified Condition

3 (core) - 3a (shield)

4.2 to 5 V applied between terminals 3 and 3a

10 to 30 mA

NOTICE:

Do not apply a voltage of 6 V or higher between terminals 3 and 3a.

HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.

If the result is not as specified, replace the navigation antenna assembly.

*a

Component without harness connected

(Navigation Antenna Assembly)

*b

Voltage Applied between Terminals

(b) Current consumption check: (GPS2)

(1) Measure the current consumption according to the value(s) in the table below.

Standard Current:

Tester Connection

Condition

Specified Condition

2 (core) - 2a (shield)

4.2 to 5 V applied between terminals 3 and 3a

10 to 30 mA

NOTICE:

Do not apply a voltage of 6 V or higher between terminals 2 and 2a.

HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.

If the result is not as specified, replace the navigation antenna assembly.

*a

Component without harness connected

(Navigation Antenna Assembly)

*b

Voltage Applied between Terminals

(c) Resistance check: (Telephone Sub)

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (core) - 4a (shield)

Always

9 to 11 kΩ

If the result is not as specified, replace the navigation antenna assembly.

*a

Component without harness connected

(Navigation Antenna Assembly)