INSTALLATION

PROCEDURE

1. INSTALL DCM (TELEMATICS TRANSCEIVER)

2. INSTALL NO. 2 MULTI-MEDIA MODULE BRACKET

(a) Install the No. 2 multi-media module bracket with the 2 screws. Torque: 3.0 N·m {31 kgf·cm, 27 in·lbf}

3. INSTALL NO. 1 MULTI-MEDIA MODULE BRACKET

(a) Install the No. 1 multi-media module bracket with the screw. Torque: 3.0 N·m {31 kgf·cm, 27 in·lbf}

4. INSTALL TELEPHONE ECU WIRE (TO TRANSCEIVER)

(a) Attach the clamp to install the telephone ECU wire (to transceiver).

(b) Connect the connector.

5. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) Attach the clamp to install the No. 2 antenna cord sub-assembly.

(b) Connect the 3 connectors.

6. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

(a) Connect the 2 connectors.

(b) Attach the guide to temporarily install the DCM (telematics transceiver) with bracket.

Install in this Direction

(c) Connect the 2 connectors.

	Bolt
	Connector

(d) Install the 2 bolts.

Torque:

12 N·m {122 kgf·cm, 9 ft·lbf}

7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

Click here

8. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

Click here

9. INSTALL CONSOLE BOX ASSEMBLY

Click here

10. PERFORM DCM ACTIVATION

HINT:

After replacing the DCM (telematics transceiver), make sure to perform DCM activation.

Click here

11. PERFORM REGISTRATION (w/ Smart Key System)

(a) for Remote Connect Compatible Type:

HINT:

After replacing the DCM (telematics transceiver), make sure to perform code registration (Smart key System (for Start Function)).