| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM10000000258B0 |
| Model Year Start: 2023 | Model: RAV4 | Prod Date Range: [10/2022 - ] |
| Title: AUDIO / VIDEO: RADIO RECEIVER: REMOVAL; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the radio and display receiver assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedures |
Necessary Procedures |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
| *: w/ Mayday System | |||
|
Radio and display receiver assembly |
Register Vehicle Information* |
- |
|
|
Software update |
|||
PROCEDURE
1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL
Click here
![2023 - 2024 MY RAV4 RAV4 HV [10/2022 - ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
(a) for 8 Inch Display:
|
(1) Remove the 4 bolts. |
|
(2) Detach the clip and remove the radio and display receiver assembly with bracket.
|
Remove in this Direction |
(3) Disconnect each connector.
(b) for 10.5 Inch Display:
|
(1) Remove the 4 bolts. |
|
(2) Detach the clip and remove the radio and display receiver assembly with bracket.
|
|
Remove in this Direction |
(3) Disconnect each connector.
3. REMOVE NO. 1 RADIO RECEIVER BRACKET
(a) for 8 Inch Display:
|
(1) Remove the 2 screws and No. 1 radio receiver bracket. |
|
(b) for 10.5 Inch Display:
|
(1) Remove the 2 screws and No. 1 radio receiver bracket. |
|
4. REMOVE NO. 2 RADIO RECEIVER BRACKET
(a) for 8 Inch Display:
|
(1) Remove the 2 screws and No. 2 radio receiver bracket. |
|
(b) for 10.5 Inch Display:
|
(1) Remove the 2 screws and No. 2 radio receiver bracket. |
|
5. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
|
|