DISASSEMBLY

PROCEDURE

1. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the 3 screws <A>.

Screw <A>

(b) Detach the guide and remove the defroster nozzle assembly.

2. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

(a) Remove the 2 screws <A>.

Screw <A>

(b) Detach the guide and remove the No. 1 heater to register duct sub-assembly.

3. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the screw <A>.

Screw <A>

(b) Detach the guide and remove the No. 1 side defroster nozzle duct.

4. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Remove the 4 screws <A>.

Screw <A>

(b) Detach the guide and remove the No. 1 instrument panel register assembly.

5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE

(a) Detach the claw and guide and remove the No. 1 side defroster nozzle.

6. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

(a) Remove the 2 screws <A>.

Screw <A>

(b) Detach the guide and remove the No. 3 heater to register duct sub-assembly.

7. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the screw <A>.

Screw <A>

(b) Detach the guide and remove the No. 2 side defroster nozzle duct.

8. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Remove the 4 screws <A>.

Screw <A>

(b) Detach the guide and remove the No. 2 instrument panel register assembly.

9. REMOVE NO. 2 SIDE DEFROSTER NOZZLE

(a) Detach the claw and guide and remove the No. 2 side defroster nozzle.

10. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Click here

11. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET

Click here

12. REMOVE ANTENNA CORD SUB-ASSEMBLY

Click here

13. REMOVE TELEPHONE ECU WIRE (w/ Telematics Transceiver)

(a) Detach the clamp and remove the telephone ECU wire.

14. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Remove the 5 screws <A>.

Screw <A>

(b) Detach the guide and remove the center instrument panel register assembly.

15. REMOVE NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

(a) Remove the 2 screws <A>.

Screw <A>

(b) Detach the clip and guide and remove the No. 2 instrument panel box door sub-assembly.

16. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

(a) w/ Interior Illumination:

(1) Disconnect the connector.

	Screw <A>
	Connector

(2) Remove the 5 screws <A>.

(3) Detach the clip and guide and remove the No. 1 instrument panel box door sub-assembly.

(b) w/o Interior Illumination:

(1) Remove the 5 screws <A>.

Screw <A>

(2) Detach the clip and guide and remove the No. 1 instrument panel box door sub-assembly.

17. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)

Click here

18. REMOVE NO. 3 INSTRUMENT PANEL WIRE

(a) Detach the clamp and remove the No. 3 instrument panel wire.

*A w/ Automatic Light Control System *B w/o Automatic Light Control System

19. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH

(a) Detach the claw and guide and remove the No. 1 defroster nozzle garnish.

20. REMOVE NO. 2 DEFROSTER NOZZLE GARNISH

(a) Detach the claw and guide and remove the No. 2 defroster nozzle garnish.

21. REMOVE NO. 1 INSTRUMENT PANEL PIN

(a) Remove the 4 screws <A>.

(b) Detach the guide and remove the 4 No. 1 instrument panel pins.

Screw <A>

-

-

22. REMOVE NO. 1 METER BRACKET SUB-ASSEMBLY

(a) for LH Side:

Screw <A>

(1) Remove the screw <A>.

(2) Detach the guide and remove the No. 1 meter bracket sub-assembly.

Screw <A>

(b) for RH Side:

(1) Remove the screw <A>.

(2) Detach the guide and remove the No. 1 meter bracket sub-assembly.

23. REMOVE INSTRUMENT PANEL CUSHION

(a) Remove the instrument panel cushion.

24. REMOVE GLOVE COMPARTMENT LOCK CYLINDER

(a) Push the stopper to release the lock, and then push the glove compartment door lock cylinder and remove it from the glove compartment door assembly.

*a	Stopper
	Remove in this Direction

25. REMOVE GLOVE COMPARTMENT DOOR CHECK CUSHION

(a) Detach the claw and remove the glove compartment door check cushion.

Remove in this Direction

HINT:

Use the same procedure to remove the glove compartment door check cushion on the other side.