Last Modified: 06-02-2026 6.11:8.1.0 Doc ID: RM100000002585O
Model Year Start: 2023 Model: RAV4 Prod Date Range: [10/2022 -           ]
Title: METER / GAUGE / DISPLAY: TRIP SWITCH: INSPECTION; 2023 - 2025 MY RAV4 RAV4 HV [10/2022 -        ]

INSPECTION

PROCEDURE

1. INSPECT TRIP SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

5 (A/B) - 2 (E)

ODO/TRIP switch pressed

Below 1 Ω

ODO/TRIP switch not pressed

10 kΩ or higher

If the result is not as specified, replace the trip switch.

*a

Component without harness connected

(Trip Switch)

(b) Check the illumination.

(1) Apply auxiliary battery voltage to the trip switch and check that it illuminates.

OK

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6 (ILL+)

Auxiliary battery negative (-) → Terminal 1 (ILL-)

Illuminates

If the result is not as specified, replace the trip switch.

*a

Component without harness connected

(Trip Switch)